Alright, me, my friend, and his brother (who has the fastest camaro ive ever seen) are gonna bore my throttle body. How much should we bore out of it? And also, should what is involed in porting and poslishing my intake manifold? He said he would do both for $10. Not a bad PRICE!!

Black Sapphire '96 RS w/ Blitz Kit
AEM CAI,AFX UDP,Apexi N1 Exhaust,NGK BKR-5e11 Plugs,Magnecore Wires,Primax 496 17's w/ Falken Azenis Tires,Blue Interior Lights,Greddy Shifter Knob-Boot-Pedals, TYC Black Taillights

AFX and Howell only bore the throttle bodies to 55mm, but someone on the asog board has bored his and others out to i think 58mm. you have to do more than just bore out the throttle body though you have to replace the butterfly valve with a larger one as well (correct me if im wrong here guys). As far as porting the intake manifold, look a few posts down and check the archives, there you will find plenty of info on the topic

Toney
'97 RS 5 Speed (totaled)
15.4606@88.42 Mph
96 Toyota Celica GT
88 Toyota Supra NA-T (w/ sports package)
Got Boost?? Hell yeah I-6 turbo powah baby!

does your friend own, work at, or have access and to a machine shop and machining knowledge? If not I would have some one else do the throttle body. The manifold on the other hand is pretty hard to mess up. Just look out for the obvious stuff like making sure you clean up all the metal shavings etc.

55 is as big as she'll go. and I didn't have to replace my butterfly valve, but I think howell might... not sure

____________________________
My $.02
95 GS

Yes Howell replaces it with a true 55mm butterfly. I don't know hoy you guys that do it yourself get a good seal. Or maybe you just aren't going all the way out to 55mm.

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold, Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

im with you michael. I dont see how you can bore out a tb to 55mm and still use the 52mm plate. I mean you could but with a 3mm gap all the way around, you engine would constanly idle @ 3000rpm+ while you coasted, just from the air leaking around the plate. Mine ran at 2000-2500rpm with a poorly cut howell plate and i barley had 1mm or less in places.

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

Yea, my friend has a personal machine shop with all the tools and crap. I dont really know all that much about stuff like that, im just there for the moral support! His dad builds Top Fuel Dragester Engines. So he will probably end up helping do it, cuz he knows what he is doing. So where can i get a new butterfly vavle from? And about how much would it be? Also, what other hardware would i need after we get it bored?

Black Sapphire '96 RS w/ Blitz Kit
AEM CAI,AFX UDP,Apexi N1 Exhaust,NGK BKR-5e11 Plugs,Magnecore Wires,Primax 496 17's w/ Falken Azenis Tires,Blue Interior Lights,Greddy Shifter Knob-Boot-Pedals, TYC Black Taillights