Hi, here it is, my firs question to the board. Where can I obtain the drawing of the cable that connect a computer to my car so that I can run the OBD2 software that I have downloaded from RRE

http://www.roadraceengineering.com/obd/obdtool.zip


My car is a 95 Talon ESI

95 Talon ESI
Mod: Custom Turbo
Modified T3 turbo on custom manifold
4 extras injectors
SDS auxiliary injectors controller
Modified 1G side mount Intercooler
Custom stainles Steel IC pip

If your not familiar with r5 cable and how to make your own connectors, i suggest you just order it online for 120 bucks.

I work as an electro-technician so, I'm able to "fabricate" cables. But I need to know which pin of the parallel port goes to which in the car.
I have a bunch of electonic thing laying around so, why not try to use them for a good cause if it's possible.

95 Talon ESI
Mod: Custom Turbo
Modified T3 turbo on custom manifold
4 extras injectors
SDS auxiliary injectors controller
Modified 1G side mount Intercooler
Custom stainles Steel IC pip