Hi, I just noticed that two of the wrist pins I got with my Eagle rods are 2.5" long, the other two are 2.25", this is obviously wrong, but I just wanted to make sure before I chew somebody's ass about it. Anyone who has Eagle rods, how long are your wrist pins?
#79957, "RE: wrist pins wrong size?" In response to Reply # 0
Look on the spec sheet that came with your pistons. Wrist pin diameter and length will be written down on that.
Sounds like you got some incorrect parts.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#80064, "RE: wrist pins wrong size?" In response to Reply # 4
Since he bought them new, he should get the right parts, IMO.
I'm not even going to go into how bad of an idea it is to shave a precision machined part like this.
The new piston has a smaller wristpin because it has a smaller base to accomodate it. Get the wristpin that is appropriate to whichever version of pistons you have.
#80068, "RE: wrist pins wrong size?" In response to Reply # 5
i only shaved about a few MM off my wrist pins, its not a 'precision machined part' really and all it needs to do it fit between the two gaps for the pin locks. in your case i would get the proper wrist pins because the ones you got are significantly different. mine were machined wrong, so i fixed them with a valve face grinder and called it a day.
_ _ _ _ _ _ _ _ _
96 Black ESi 91 Red TSI AWD (RIP) 02 WRX
"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"
Aerospace Certified TIG welder for Precision Castparts in Portland, OR.
#80286, "RE: wrist pins wrong size?" In response to Reply # 6
Thanks, guys. I'm getting my rotating assembly balanced tomorrow anyway, so I just put a grinder on them till the micrometer read 2.249, and put a little taper on the outside corner to approximate the other side. They seem pretty snug in the piston. Lesson: Don't buy your internals on eBay if you're not willing to wait a couple months for the seller to fix his mistake.
#80287, "RE: wrist pins wrong size?" In response to Reply # 7
Originally posted by CJ_96RS anyway, so I just put a grinder on them till the micrometer read 2.249, and put a little taper on the outside corner to approximate the other side. They seem pretty snug in the piston.
right on man ...exactly what i did. its not like you weakened them at ALL either.
get a pic i wanna see how you did it compared to what i had to do
_ _ _ _ _ _ _ _ _
96 Black ESi 91 Red TSI AWD (RIP) 02 WRX
"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"
Aerospace Certified TIG welder for Precision Castparts in Portland, OR.
Search
Printer-friendly copy
1 User in Chat
...exactly what i did. its not like you weakened them at ALL either.
i wanna see how you did it compared to what i had to do