#76625, "SFMU settings??, on a stock fuel set up for now"
Ok, I searched and searched and nothing clear. I running my fuel return system for my turbo setup while my motor is out. I need to know what springs, discs, and settings I need to run the SFMU with stock injectors, Walbro 255? I want to run the car without the turbo first to make sure everything is ok. So I just need to know what settings would make the stock motor happy.
I dont think this makes a difference, but I will include the internal mods.
JE 10.5 to 1 Hi comp Crane #0014 turbo cams Eagle rods blah blah blah
#76627, "RE: SFMU settings??, on a stock fuel set up for now" In response to Reply # 0
Well just follow the test proceedure for a stock fuel system. the disks are for the turbo so that will depend on your turbo setup. Dark spring will be needed.
Test proceedure is to energize the pump with engine off. you can use a scanner for this or a jumper wire at the fuel relay. with the engine off and the fuel pump running continuously the FP should be 47-50psi. with stock injectors set the fmu to that with no vacuum hose attached. thats it your done.
car will run stock with SFMU
Terry
96 Eagle talon ESI Star Stage II - Boost/oil/EGT gauges
Search
Printer-friendly copy
5 Users in Chat
