Does anybody know if the foot long fuel feed lines on 420a's and 4g63's are the same? Im talkin about the end that goes into the fuel rail that takes the two 8mm bolts. Thanx ahead!!

DJ

LOLOLOL, You got it. Well it was worth the try. Thanx again!!!

DJ

heres an idea DJ....i have a 95 rail i gave this a try in. I tapped the inlet for a 4an fitting. it worked there was enough material to tap into. You can get a o-ring for the fitting and intall a 4an-6an union. I havent pressurized it yet to test. I plan on making it work becasue that will be the next step in my fuel setup.

For now i have the rubber line cut and a 6an socketless fitting installed with a clamp. will work fine but you still have to go through that small fitting in the rail. Granted our rails still have the small pipe that goes into the main body.

Terry

96 Eagle talon ESI
Star Stage II - Boost/oil/EGT gauges

97 Eclipse
Greddy header/evo exhaust - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: Apexi AFC, HKS EVC IV, 450 Turbo injectors, SFMU/return line, GSX Front brakes (need rotors)

Man thats a good idea. Thanx, I will check into that!!Later

DJ