I am set to buy a 97 eclipse rs with a stage 2 star turbo kit. It can be viewed on the previous owners cardomain page here: http://www.cardomain.com/id/mitifto THe car is goregous and has many upgrades which i will list now: Interior: *Corbeau Racing seats with Harness *Carbon Fiber Trim Kit *Mach V Short Shift Kit *Two Tone Custom Interior *Indiglo Gauges *Custom Short Shift
Exterior: *Molded Blitz Body Kit *Wings West Commando Wing *TYC Carbon Fiber Rear Lights *APC Carbon Fiber side Mirrors *Multi Layer Candy Blue Paint w/ Ghost Flames
The ownwer says its perfect now and runs like a 13.8 quater mile, but to be honest i'd like to make it a little faster. WHat should i do next? I dont want to be running too much HP and jeopardize the engine, axle, or any other components that may be at risk. I need advice on what to do. I was considering rebuilding the bottom end and running more boost (Right now its at 8psi) but i dont know if the car could handle any more even with new pistons, rods, etc. PLEASE HELP ME!
#71998, "RE: What should i do next?" In response to Reply # 1
Yup im buying it tuesday. but yea like be more specific, in order to run more boost what all do i gotta do? ive been told the axle doesnt hold too much hp and could possibly snap especially on the RS. How much am i looking at spending to do all this? I wanna be faster but at the same time i wanna be careful, the car is practically in mint condition and only has 38k miles, i'd hate to do anything that would hurt it.
#72004, "RE: What should i do next?" In response to Reply # 2
You will need to bullet proof the bottom end before you can get mad with the boost and make more power. You'd also be wise to contact a vendor like ERT and see what they would recommend in the way of headwork to maximize flow. It looks like it's a pretty tight car (I know I've always liked it ) Upgraded axles are an easy fix. Just check out Raxles.com for them. Just keep in mind, if you don't have a lot of experience with tuning a turbo'd 420A, you might want to take it easy at first until you really get to know her. 13.8 is pretty quick for a 2GNT imo. Once you become one with the car, then you'll be better able to say "I want to do this here and change that there..."
Congrats on the purchase! Glad to hear it's staying in the family so to speak.
nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!! thanks for www.kaptainmyke.com for the sig hosting
#72022, "RE: What should i do next?" In response to Reply # 3
Originally posted by DR1665 You will need to bullet proof the bottom end before you can get mad with the boost and make more power. You'd also be wise to contact a vendor like ERT and see what they would recommend in the way of headwork to maximize flow. It looks like it's a pretty tight car (I know I've always liked it ) Upgraded axles are an easy fix. Just check out Raxles.com for them. Just keep in mind, if you don't have a lot of experience with tuning a turbo'd 420A, you might want to take it easy at first until you really get to know her. 13.8 is pretty quick for a 2GNT imo. Once you become one with the car, then you'll be better able to say "I want to do this here and change that there..." Congrats on the purchase! Glad to hear it's staying in the family so to speak.
Thanks a bunch everyone, mainly your DR. That is what i planned on doing anyways, not just to see what needs tweaking but also monetary issues as well. Gotta save up some cash before i can really start to have too much fun with it. When i do decide to start pouring money into her ill make another post n probably be asking for more advice as to what to do first, etc. Thanks again!
#72023, "RE: What should i do next?" In response to Reply # 6
Don't forget to read the Turbo Archives. Just click through, read, and learn.
-------jezreel 1998 GS with hrc stage 2, sfmu, ml, prokits, egt, boost gauge, apexi tt, haydans tranny cooler, costum dp, dr. uber groundwires, dynotune fp gauge. gst muff, turbo spoiler Boostin since Aug 03.
nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!! thanks for www.kaptainmyke.com for the sig hosting
#72032, "RE: What should i do next?" In response to Reply # 8
def do what the good dr said and check out ert. they have some great prices on their products. nice job gettin mitifo's or w/e the hell his name is car. its very nice imo.
Search
Printer-friendly copy
0 Users in Chat
) Upgraded axles are an easy fix. Just check out Raxles.com for them. Just keep in mind, if you don't have a lot of experience with tuning a turbo'd 420A, you might want to take it easy at first until you really get to know her. 13.8 is pretty quick for a 2GNT imo. Once you become one with the car, then you'll be better able to say "I want to do this here and change that there..."
