Jeez, it just keeps getting worse and worse. I put my exhaust cam to -2.5 and intake to 0 and now im throwing the codes 11, 25..cam/crank sensor and target idle not reached. The idle is very lopey now and sits at about 800 rpms..what did i do wrong?
#71001, "RE: CEL's after tuning cam gears...11, 25" In response to Reply # 0
Target idle is 750rpm I believe. I'd say if you got the rpms to settle down a bit more at idle you'd be golden on that one. It can also trip that code if the car "hunts" for idle, which it may be doing when it lopes. Good luck sir.
#71014, "RE: CEL's after tuning cam gears...11, 25" In response to Reply # 1
should i be loping after tuning the cams? Also, what about the cam/crank sensor cel? The car drives great, misses a little at 70mph but i guess thats normal.
#71017, "RE: CEL's after tuning cam gears...11, 25" In response to Reply # 3
im running stock cams, but my head is milled .050. Yes i know that its 2 degrees per mark, 2.5-3 should put me back to stock. So i should reset the computer after messing with the cam gears?? i didnt know that at all!
#71021, "RE: CEL's after tuning cam gears...11, 25" In response to Reply # 4
Put thje exhaust cam back to 0. that is why your car runs like shit - you've taken the injector timing out of whack.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#71027, "RE: CEL's after tuning cam gears...11, 25" In response to Reply # 6
Originally posted by Skrilla Dino he's milled
Missed that. oops.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#71040, "RE: CEL's after tuning cam gears...11, 25" In response to Reply # 7
Yeah but you need to find zero, you don't know for sure where it is. You are outside the 3 degree window the ECU give you before the CEL is triggered. Get the exhaust cam to stock placement and play only with the intake cam.
Exile Racing Technologies: http://www.exileracing.com una salus victus It's holding down the garage floor right now.
Search
Printer-friendly copy
0 Users in Chat
It can also trip that code if the car "hunts" for idle, which it may be doing when it lopes. 
Good luck sir.
