Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Corbin's A/F Gauge MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
#7028, "RE: does anybody know the part # for our tranny" In response to Reply # 0
LAST EDITED ON 13-Nov-01 AT 11:17 AM (PST)
Manual:
Some people swear up and down it's an NV-T350, but that's not the Mitsu part number. It's made by New Venture Gear, but the mitsu/DSM part number is F5MC1, i believe. look in the tech/service manuals.
Auto: F4AC1 _____________________________________________ -Dino Yancey Hello me, it's Me Again!
For Mitsubishi Technical Manuals, INCLUDING the 97-99 electrical and service manuals, click HERE: http://www.heavenz-not-0verflowing.com/files/ No MP3 for YOU! Somehow, the Proud Owner of not-your.biz
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Corbin's A/F Gauge MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
#7030, "RE: does anybody know the part # for our tranny" In response to Reply # 3
Ya know what? So do both of mine
That's not the part number. The tranny internals are made by New Venture Gear, they make most Chrysler trannies (Mostly Jeep stuff) which is where that comes from.
_____________________________________________ -Dino Yancey Hello me, it's Me Again!
For Mitsubishi Technical Manuals, INCLUDING the 97-99 electrical and service manuals, click HERE: http://www.heavenz-not-0verflowing.com/files/ No MP3 for YOU! Somehow, the Proud Owner of not-your.biz
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Corbin's A/F Gauge MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
#7032, "RE: does anybody know the part # for our tranny" In response to Reply # 5
Probably. Either that, or you can likely order the parts direct from New Venture Gear. Several of my co workers as well as both my mother and stepfather are Jeep'ers, and i gather that there is pretty good aftermarket support for the New Venture stuff.
Look into it. Let us know..
_____________________________________________ -Dino Yancey Hello me, it's Me Again!
For Mitsubishi Technical Manuals, INCLUDING the 97-99 electrical and service manuals, click HERE: http://www.heavenz-not-0verflowing.com/files/ No MP3 for YOU! Somehow, the Proud Owner of not-your.biz
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#7034, "RE: does anybody know the part # for our tranny" In response to Reply # 7
Dude, it'll work. That has nothing to do with the tranny (even tho the neon r/t tranny is internally identical to ours.)
That's just linkage.. which should be the same. Buy the thing already.
_____________________________________________ -Dino Yancey Hello me, it's Me Again!
For Mitsubishi Technical Manuals, INCLUDING the 97-99 electrical and service manuals, click HERE: http://www.heavenz-not-0verflowing.com/files/ No MP3 for YOU! Somehow, the Proud Owner of not-your.biz
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#7035, "RE: does anybody know the part # for our tranny" In response to Reply # 8
I suspect the neon short shifter will not fit more due to dash design. Ever see how a neon shifter sits? Just buy the one made for the eclipse. All Eclipses have the same shifter. As for the tranny, it is the NV-T350 but the bellhousing is not the exact same as the Neon. Darkone is right in saying the internals are the same but the part is modified for mitsu use. For different gears, I do know you can use the gears from the SOHC, but these are a 3.55 vs our 3.94 so not really good for performance if you are all motor. If you are turbo and find yourself spinning a lot it could be of some use though.
MuRiX 97 Eclipse GS HRC Stage IV+ Sitting and collecting dust most of the time.. A.D.P. http://www.murix.com
#7036, "RE: does anybody know the part # for our tranny" In response to Reply # 9
I just want to get down the track faster. 1st gear seems really slow to me and then finally 2nd and 3rd seem a little better. I want to be faster off the line and down the whole 1/4 mile.
Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Corbin's A/F Gauge MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
#7038, "RE: does anybody know the part # for our tranny" In response to Reply # 11
I have tried 4,000 but thats too much wheel spin. I dropped it to 3,000 and I am still spinning with 2.4 60' times. I am probably going to the track tonight and I am going to try slipping the clutch a little more to see if I can improve my 60' times. I still have shitty tires up front but I should be getting grippy tires soon so that should help too.
Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Corbin's A/F Gauge MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
#7039, "RE: does anybody know the part # for our tranny" In response to Reply # 12
Try launching at 4k rpm on good tires, but do not give it full throttle until it hooks up. Try mid throttle and playing with it until you get traction. Once it hooks up nail it.
MuRiX 97 Eclipse GS HRC Stage IV+ Sitting and collecting dust most of the time.. A.D.P. http://www.murix.com
#7040, "RE: does anybody know the part # for our tranny" In response to Reply # 13
Well I am going to the track tonight so I'll see what I can do on these SHITTY tires. I just have to make sure not to dump the clutch because the stage 3 grabs right away and the tires break loose.
Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Corbin's A/F Gauge MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Nameless Cold Air Intake with a K&N Filter Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...
Search
Printer-friendly copy
3 Users in Chat
