so i was inspectin my engine bay with the engine running tryna find a vac leak and i noticed this crack on my coilpack. i moved in for a closer look and touched part've the casing the fricken thing SHOCKED me!! it scared the fuck outta me too... i felt it jump to my finger and from my leg back to the fender.

now obviously this crack shouldn't be there... anyone know if howell will give me a hard time about getting a replacement? is this doing anything bad to my engine for the time being? obviously the coilpack isn't insulated but will it be grounding out to anythinng else for the time being? my cars idle is rough so idk if this is related at all... i'm prett damn sure it wasn't like this when i got it. only had it for a month or two... i would swap in my stocker but i already converted the wire harness and it would be a MAJOR PITA to recut and solder everything...

-marc

lol!

I think howell will give you a replacement, that seems to be a manufacturer defect.

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

haha cool. i'll try emailing them.

oh yea since i didn't die do i need to worry about anything else after getting zapped with that kinda voltage? (i know, i know - it's not voltage, it's the current that kilss you) my dad said i'm sterile now.

-marc

You know if this thing would be a good upgrade for a turbocharged eclipse such as mine?

70 bucks isn't too bad if it actually makes some kind of a difference

FS: 2.5" Test Pipe 25 shipped

being shocked from those 'can' hurt ya bad.. even kill you (although not likely) i just got the crap shocked out of me by my pickup a week ago while playing with the plug wires. in one hand and out the other.. right through my heart.. yikes...

and yes.. they can definatly be the cause of your bad idle.. you may have a bad connection with that plug wire.. or it could be arching to that bolt that is right next to it.. they run plenty of voltage to arch that far.

I wonder if Howell gonna replace it? No imo.

-------jezreel
hrc stage 1, sfmu, ml, prokits, egt, boost gauge, apexi tt, haydans tranny cooler, costum dp, dynotune fp gauge. gst muff, turbo spoiler

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!
thanks for www.kaptainmyke.com for the sig hosting

Those are awesome coils, and you will see a performace improvement if your running heavy mods, w/ this coil increase the gap of your plugs .015" more than what you would normally run. Higher voltage lets you have a bigger gap w/o detonation problems, bigger gap = longer spark, longer spark = bigger flame kernel = more final burnt fuel = more power.

Manufacturer defect, make howell replace it.

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

ya i'll keep you guys posted on what they say... i just want a replacement. i'm ok with the fact that it could've killed me.

-marc

_______________________________________
AZ2GNT
JOE - Lifted 95 Jeep Grand Cherokee
www.nagca.com

This is funny.. LOL.
you lucky you didn't die or have a new hair style (like Einstein).. lol

~~~~~~~~Modification~~~~~~~~
Performance: MegaSquirt v3.0 Fuel & Spark, 8.6:1 JE piston, Eagle Long Rods, SPEC III Clutch, EVOIII B16G, FMIC, Aeromotive 1:1 FPR, Walbro 255HP, 680cc Injectors, 2.5" DP, 3" Magnaflow Cat, 3.5" Greddy EVO CatBack, Greddy Electronic EGT,FUEL,BOOST,A/F gauges...
Interior: Racing Seats, Metallic Interior, 15-Speakers System, Keyless, Dynomat Insulated, Neons...
Exterior: 1999 Body with turbo wing, Halo Projector Headlight, 4300K HID, 17" Mille Rims, GSX Calipers...
Coming Soon: Water Injection, Redo Undercarriage, Repaint Exterior


$240 For New Complete GSX Calipers Kit (Calipers, Bracket, Shim, Pad, Bolts, etc) Email Me If Interested!

1995 RED Eclipse GS-'T': Stage VI 20PSI
2010 Audi S5 Quattro

This reminds me of the time my shop teacher in high school told a kid to hold the spark plug wire and pull the crank for this little briggs and stratton lawn mower engine. This dude screamed like the littlest girl.

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

There is not enough current though the coilpack to kill you, nor make you sterile.

I imagine howell will replace it. If not, hell, it's not like it's an expensive part.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

I just found a new question to add to my form.

"Will I die if I get shocked by my coil pack?"

Mototool - The other white meat!

"He might just be more badass than Dino." -DR1665

It's good for you, it cleans your body from bad stuff It will even help you pass drug tests.

Did howell honor the exchange? How long have you had it? Edit: I read 1 to 2 months, even if you cant go through howell, even the manufacturer should replace it if you bug them.

Is the Screamin Deamon coil pack a direct replacement for the factory coil? any wiring harness modification needed?

1999 C5
1997 Silver RS
Wiseco 8.8:1 Pistons(back to low compression!)
Eagle Rods
T3/T4 Turbo
Custom FMIC
Greddy Exhaust
390's
Most current 1/8th mile time: 8.3@90mph 2.015 60'(Nitto Drag radials, i suck)

-marc

"That is not a defect, that is damage. Coils do not crack unless they are damaged. It appears something has impacted the coil causing it to crack. It appears from the photo's you linked that the cracked coil tower is pushed down. I would think the hood may have been closed on something causing the damage. I called the manufacturer, they said that damage is not covered for replacement.

Gary"

blah. i wonder what the hell caused it then...
pretty sure it wasn't smashed by the hood or anything being that there's my STB running directly over it...
do you guys think i should try bugging the manufacturer?

-marc

that's bs.


Jon

1997 Eclipse RS

13.887@104.648 5/30/03

www.haiokuracing.com

Who is the manufacturer?

Originally posted by MCubed45
"That is not a defect, that is damage. Coils do not crack unless they are damaged. It appears something has impacted the coil causing it to crack. It appears from the photo's you linked that the cracked coil tower is pushed down. I would think the hood may have been closed on something causing the damage. I called the manufacturer, they said that damage is not covered for replacement. Gary" blah. i wonder what the hell caused it then... pretty sure it wasn't smashed by the hood or anything being that there's my STB running directly over it... do you guys think i should try bugging the manufacturer?

__________________________________________
~Chris
03 SRT-4

Oh that's f'king bs.

Your argument is that the defect caused the post to crack under normal conditions.

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

we'll see how this goes... i just emailed them back..

oh yea, this's direct from their site:
"This coil carries a full 1 year warranty"
http://www.howellautomotive.com/Howell/Store/catalog/catalog/product_info.php?products_id=671

i'm not sure what their terms are but i thought warranties covered things like this?

Dear Gary,

The coilpack was not damaged in any way while it was on my car. The hood was not closed while any object was on the coil. To clarify, the coil tower is not bent in any way nor are there any markings which would indicate an impact. I also have a front upper strut tower bar which runs directly over the coil which would further prevent the possibility of any impact upon the coil. I do not know what caused the crack but being that the coil was only used as intended and under normal operating conditions I do not feel it is normal or acceptable for a product to defect in this way after such a short period of time. I would greatly appreciated your reconsideration in this matter. Thank you for your time.

Marc

-marc

That is a well written response imo

__________________________________________
~Chris
03 SRT-4

most times, you can even bypass the middle man and contact the manufacturer directly.. and generally they give the customer what they want (provided that it is a resonable request). So if Gary declines your last submitted letter, I would try going direct, and if they replace it when gary wouldn't, :/