#68764, "Dropping in new engine saturday, checklist"
ok, new fty block going in on saturday. i think i have everything i need for the install, but i want to make sure. block is fully assembled. im using my stock head off my car now.
Block/internals crankscrapper spec stg3 clutch, new tob phantom grip gatorback timing belt afx underdrive pully/belts new water pump new melling oil pump new idler/tensioner pullies case of reg. 10x30 motor oil 2 oil filters. full upper gasket set. new rear main seal 3 quarts of nvt-350 tranny fluid
i dunno what else. i have a bunch of the black rtv stuff. and blue locktight. ill have an air tool set and all the sockets i need. anything i missed. i also have the harmonic ballencer puller thing. and i bought a tourque wrench. got an engine hoist and holder.
gimme some advise here now. and see if im missing anything.
#68768, "RE: Dropping in new engine saturday, checklist" In response to Reply # 0
i dunno. sounds good to me though. let us know how it goes and how much of a pain in the ass it is. i might be getting mine in in a couple weeks. just wondered.
New/More Mods Comming... New 1/4 Times In March/April
#68771, "RE: Dropping in new engine saturday, checklist" In response to Reply # 0
Originally posted by grain ok, new fty block going in on saturday. i think i have everything i need for the install, but i want to make sure. block is fully assembled. im using my stock head off my car now. Block/internals crankscrapper spec stg3 clutch, new tob phantom grip gatorback timing belt afx underdrive pully/belts new water pump new melling oil pump new idler/tensioner pullies case of reg. 10x30 motor oil 2 oil filters. full upper gasket set. new rear main seal 3 quarts of nvt-350 tranny fluid i dunno what else. i have a bunch of the black rtv stuff. and blue locktight. ill have an air tool set and all the sockets i need. anything i missed. i also have the harmonic ballencer puller thing. and i bought a tourque wrench. got an engine hoist and holder. gimme some advise here now. and see if im missing anything.
If the oil pump isnt already installed you will need anarobic sealant. Other than that the list looks complete besides having some extra hands for the job. AZ 2GNT is putting eclipseman1999's new block in this weekend also.
Search
Printer-friendly copy
1 User in Chat
