#68480, "Screamin' Demon coil pack and plug gapping"
I just got a screamin demon coil pack and accel wires. I have a NX nitrous kit and im running the ZEX nitrous plugs (one range colder). I read about the coil pack at howell's site and it mentioned gapping the plugs to 0.65 with it. The Zex plugs came pre-gapped and thats how i left them. Is this ignition set up decent? for nitrous? Should i pull the plugs and gap them at 0.65?
#68506, "RE: Screamin' Demon coil pack and plug gapping" In response to Reply # 0
W/ the screamin demon coil I would adjust them .015 larger than what your suppose to be running (ie, n/a: .050 + .015 = .065, forced induction/nitrous: .035 + .015 = .050). This is to take advantage of the coil having a substancial increase in voltage.
Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician
#68529, "RE: Screamin' Demon coil pack and plug gapping" In response to Reply # 0
Originally posted by IntenseEclipse2 I just got a screamin demon coil pack and accel wires. I have a NX nitrous kit and im running the ZEX nitrous plugs (one range colder). I read about the coil pack at howell's site and it mentioned gapping the plugs to 0.65 with it. The Zex plugs came pre-gapped and thats how i left them. Is this ignition set up decent? for nitrous? Should i pull the plugs and gap them at 0.65?
Ya I agree with WickedESi. This coil pack is prety serious so I'd gap them pretty good. Howell's site says it will take .65. I'm not sure how far that is trusted for us but Neons do run almost identicle motors so I'd definitely shoot for at least .55
*Skrilla "Honest officer, I thought you were trying to race me" Talon: 1st 2.4L '97 Prelude '04 350Z
Originally posted by YourInMyMirror95GS dick teaser's should be rounded up and shot in the forehead
Originally posted by etx Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon!
Originally posted by Dark0ne Thanks. Now excuse me while i fuck your sister.
Search
Printer-friendly copy
0 Users in Chat
