I bought a universal exhaust.which is the dtm style exhaust (dual tip that comes out and points up). It has np hangers or mothing like i expected it to so what i am asking how do i install it......for exaple how to get it to hang with out the places for the hanger? any help would be great and most helpfull.
#68300, "RE: dtm exhaust install" In response to Reply # 0 Feb-12-04 08:57 AM by GhEttOrAiD
Take it to exhaust shop, they can probably just weld some roundbar onto your ...cough... +60hp muffler, bend the bars into hangers and... that should do the trick...
The one near me has done a ton of work on all our cars, theyre very resourceful. (repaired my badly cracked up downpipe, its been fine for 2k miles!)
#68322, "RE: dtm exhaust install" In response to Reply # 0
I have the same muffler. you have to modify the hangers a little bit. If you can weld you should be able to figure it out like I did. I took of the old muffler and cut off the hanger and fabbed it together. not hard but if you can't weld bring it to a muffler shop. Also if its a straight in style (the hole where you connect the exhaust) you'll need to bend you existing pipe a bit.
Good LUck!
I eat emo kids for breakfast
1995 Eagle Talon (SOLD) 72' SuperBeetle 72' Standard Beetle 56' Deluxe Beetle
#68388, "RE: dtm exhaust install" In response to Reply # 5
got the exhaust put on and i love it....but i got tired of messing wih it and took to the shop and it cost me 35 bucks.....but back to the exhaust...if your looking for a good deep sound get the dtm style muffler but i imagine after a while it will get louder.....thanks for yall's help
Search
Printer-friendly copy
1 User in Chat
