#67911, "Does my Cam position sensor run my injectors??"
I think my sensor is shot cause I've got NO injector pulse. What else would cause this. My dad tested the injectors last night and said there was no pulse at all.
I eat emo kids for breakfast
1995 Eagle Talon (SOLD) 72' SuperBeetle 72' Standard Beetle 56' Deluxe Beetle
#67913, "RE: Does my Cam position sensor run my injectors??" In response to Reply # 0
make sure the wiring harness isnt caught under the egr tube, that would cause a huge short and stop the injectors. The cam sensor tells the ecu where the cams are during cycle which in turn tell the injectors when to fire etc, everything is linked in one way or another.
#67914, "RE: Does my Cam position sensor run my injectors??" In response to Reply # 1
Yes, the cam signal determines injector timing. If the sensor is bad or the ECU is getting no signal, the ECU will not fire the injectors.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#67915, "RE: Does my Cam position sensor run my injectors??" In response to Reply # 1
Thats what I thought. We're getting a new cam angle sensor this afternoon. I hope that fixes it....I don't think anything is shorting on the EGR but I WILL look when I get home.
Anyone else got any suggestion??
I eat emo kids for breakfast
1995 Eagle Talon (SOLD) 72' SuperBeetle 72' Standard Beetle 56' Deluxe Beetle
#67967, "RE: Does my Cam position sensor run my injectors??" In response to Reply # 6
when my rotted crank angle sensor broke it costed 200 bucks i needed it quick style so i had to get it from satan. owned. _________ 96 talon esi-t san clemente, ca
as needles of ice are the ill winds' talons the coldest of shadows they seep unto the bone
#67987, "RE: Does my Cam position sensor run my injectors??" In response to Reply # 8
Originally posted by Blizare ummm....i think it was like $30 bux......not 200
crank sensor, not cam angle sensor.
camshaft position sensor: determines fuel igniton and injection along with the crank angle sensor and other sensors. a target magnet attaches to the rear of the camshaft. the magnet has 4 diff poles in an asymmetrical pattern, as the target magnet rotates the camshaft position sensor senses the change in polarity. the sensor output switch switches from high (5.0 volts) to low (.30 volts) as the magnet rotates. also acts as a thrust plate to control camshaft end play.
courtesy of the tech info manual
_________ 96 talon esi-t san clemente, ca
as needles of ice are the ill winds' talons the coldest of shadows they seep unto the bone
#67989, "RE: Does my Cam position sensor run my injectors??" In response to Reply # 10 Feb-06-04 11:31 AM by DarkOne
Originally posted by turbo8u crank sensor, not cam angle sensor. camshaft position sensor: determines fuel igniton and injection along with the crank angle sensor and other sensors. a target magnet attaches to the rear of the camshaft. the magnet has 4 diff poles in an asymmetrical pattern, as the target magnet rotates the camshaft position sensor senses the change in polarity. the sensor output switch switches from high (5.0 volts) to low (.30 volts) as the magnet rotates. also acts as a thrust plate to control camshaft end play. courtesy of the tech info
You like that, eh? Every 2gnt'er should read it.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#68006, "RE: Does my Cam position sensor run my injectors??" In response to Reply # 11
shit. I just changed the friken sensor and still no go.....i got lots of spark, a new fuel pump, lots of fuel at the rail.....hmm...the scanner says thaat there is a crank signal so that sensor is o.k.....grrrr..Looks like I'm driving camellia's truck to calgary tomorrow.....shitty s-10....no fun IMO.....
I eat emo kids for breakfast
1995 Eagle Talon (SOLD) 72' SuperBeetle 72' Standard Beetle 56' Deluxe Beetle
#68007, "RE: Does my Cam position sensor run my injectors??" In response to Reply # 0
Originally posted by Blizare I think my sensor is shot cause I've got NO injector pulse. What else would cause this. My dad tested the injectors last night and said there was no pulse at all.
Cam Position Sensor, Crank Position Sensor, and TPS work together to control injectors and spark. All three are needed to generate an RPM pluse.
Visit the Howell Automotive Open House August 20th, 2005. The largest gathering of Chrysler 2.0 engines on the planet.
US Small Business Administration Export Business of the Year for 2003
#68017, "RE: Does my Cam position sensor run my injectors??" In response to Reply # 13
well it stared...believe it or not.....Once I rigged up the CAS it started....ran a little rough......and I took it for a spin.....now it's running like normal.....FUck my car is possessed!
I eat emo kids for breakfast
1995 Eagle Talon (SOLD) 72' SuperBeetle 72' Standard Beetle 56' Deluxe Beetle
#68023, "RE: Does my Cam position sensor run my injectors??" In response to Reply # 14
Sounds like you have something that is breaking down. It will probably leave you setting one day. Bad thing is those intermittent problems are the worse to find.
Visit the Howell Automotive Open House August 20th, 2005. The largest gathering of Chrysler 2.0 engines on the planet.
US Small Business Administration Export Business of the Year for 2003
Search
Printer-friendly copy
0 Users in Chat
i needed it quick style so i had to get it from satan. owned.