Ok i have just ordered the hahn stage 2 kit and i have a built head and bottom end. I am also gettin the chill factory sfmu. I was wanting to know what injectors i need to run with this setup? Please help me with this!

440s

Hell yeah get some 440's from RC or go a little cheaper and get ford 42lb'ers they are the green top ones from the lightning.
Patrick
96 GS
14.14 @ 96.5 mph on 8psi 8 Nov.02
HRC kit, S20G, FMIC, Howell bottom end 8.6 pistons, S-FMU, Blitz BOV, P&P head, SS valves, lots more little goodies

What you didnt' tell us is how boost you want to run? How much power you want to make.

That's a nice setup. But if you are running That set up and only lie 10 psi, there's no need for the 440's.

We need more info.



Exile Racing Technologies: http://www.exileracing.com
una salus victus
Mods List: http://highlander.dsmpower.com/sig.htm

My post was in hopeing that he would buy an EBC and up the boost over the the stage 2 actuator. Maybe like 16psi
Patrick
96 GS
14.14 @ 96.5 mph on 8psi 8 Nov.02
HRC kit, S20G, FMIC, Howell bottom end 8.6 pistons, S-FMU, Blitz BOV, P&P head, SS valves, lots more little goodies

Ok guys i have already ordered the EBC and i was wanting to run like 12-18psi or have about 300+ hp so what injectors would i need then?

Like we said ^^^ 440's my man
Patrick
96 GS
14.14 @ 96.5 mph on 8psi 8 Nov.02
HRC kit, S20G, FMIC, Howell bottom end 8.6 pistons, S-FMU, Blitz BOV, P&P head, SS valves, lots more little goodies

Im ordering the mustang 42lbs injectors. Are there any mods that i have to do to them for them to work??

BUMP!!!!!!

Are they the green top ford motorsport inj? If so they are plug n play. They go in like they were meant for the car. Getting the fuel rail off on the other hand is a little tricky the first time you do it. There are only 2 bolts that hold the rail on the mani. Good luck!
Patrick
96 GS
14.14 @ 96.5 mph on 8psi 8 Nov.02
HRC kit, S20G, FMIC, Howell bottom end 8.6 pistons, S-FMU, Blitz BOV, P&P head, SS valves, lots more little goodies