Ok At my job(advance Auto Parts) we got this new catalog for PowerAid. Its a Throttle Body Spacer that Spins the air. Well im kind of secpticle of the hole Spining air thing, but i was thinking of the spacer reduceing heat, their for increase HP. Now they dont have a listing for us but they have one for the 91-99Jeep Cheeroke 4.0L. So itll be 60mm and since the TB fits this must fit. Only Thing im wondering about is the throttle Body Cable. Also is buy magnaflow, they make good products. If Indy every comes out with thier manifold anytime soon ill get a 60mmTB and dyno it then add this bitch and see if thier are any real Power Gains.


http://www.bestautopartsonline.com/poweraid_products.htm

1997 Dodge Avenger I-4 5-Speed
DreamSpeed Cold Air Intake,AF/X Under Drive Pully, ES Motor Mount Inserts, MSD DIS2, MSD Coil Pack, MSD 8.5mm Wires,Aluminem Flywheel,Spec Stage1 Clutch,Crank Scraper, Quaife LSD,Airmass 4-1 Headers, Test Pipe, Bosal Catback,B&M Short SHifter(50%),Symbroski Shifter Kit, Grounding Kit, Solid Front Motor Mount

GHEY!!!!!!!!!!!!!

These things are so last year! they rank right up there with the "Tornado electric Turbo".

you will not "reduce heat" by having a TB spacer. you need to cool the intake air by matters of degrees, not 1/10ths of degrees.

dont waste your money.

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

It would do some good if it were placed closer to the head, but a TB spacer is worthless.

Matt
1995 Eclipse GS
2.0L, S16g Turbo, 8 Injectors, 26psi

1998 Eclipse GSX
2.3L Stroker, AEM EMS Converted to Speed Density, FP3065 Turbo, 35psi , and so on...

some people are making plenum spacers for the 3/s community which drastically reduce underhood/manifold temps by dissapating heat. i forgot what they are made of, but these would be hella cool. it pretty much goes where the gaskets go.

those things have decent gains for trucks

CAI, UDP, 2.5 custom exhaust, hi flow cat, P&P TB, ported intake, 8.5mm MSD wires.

ide try it... shit. best case, you get gains..

worst case, you sell it on ebay for 20$ under what you bought it for...


they are only 100$...

2005 Corolla XRS
2ZZ 6-speed

From what I understand gains with those things are only found on vehicles that don't have direct port fuel injection. These vehicles have trouble getting a good even mixture of gas and air and the swirling effect helps fix this.

It Only cost 69.53. If it works then cool shit if it doesnt i have a pretty cool looking coaster. Thats the way i see it.

1997 Dodge Avenger I-4 5-Speed
DreamSpeed Cold Air Intake,AF/X Under Drive Pully, ES Motor Mount Inserts, MSD DIS2, MSD Coil Pack, MSD 8.5mm Wires,Aluminem Flywheel,Spec Stage1 Clutch,Crank Scraper, Quaife LSD,Airmass 4-1 Headers, Test Pipe, Bosal Catback,B&M Short SHifter(50%),Symbroski Shifter Kit, Grounding Kit, Solid Front Motor Mount

*Skrilla
"Honest officer, I thought you were trying to race me"
Talon: 1st 2.4L
'97 Prelude
'04 350Z

Originally posted by etx
Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon!

if you want to "swirl air, do it right before the fuel injectors as it goes into the head. it would help mix fuel even more. hell, thats has gas turbines work (although different same basic principle) swirl the air to mix the air/ fuel together.

"Shop smart, shop S-Mart!" ~ Ash
Member # 1523

Hey Skrilla, was it the same brand, if not who made it

1997 Dodge Avenger I-4 5-Speed
DreamSpeed Cold Air Intake,AF/X Under Drive Pully, ES Motor Mount Inserts, MSD DIS2, MSD Coil Pack, MSD 8.5mm Wires,Aluminem Flywheel,Spec Stage1 Clutch,Crank Scraper, Quaife LSD,Airmass 4-1 Headers, Test Pipe, Bosal Catback,B&M Short SHifter(50%),Symbroski Shifter Kit, Grounding Kit, Solid Front Motor Mount

*Skrilla
"Honest officer, I thought you were trying to race me"
Talon: 1st 2.4L
'97 Prelude
'04 350Z

Originally posted by etx
Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon!

if its cooling the intake manifold you want, you want a Corbin spacer. goes between the upper and lower intake pleniums

-----------------------------------------
2011 Nissan Xterra Pro-4x

2007 Kawasaki Ninja 650R

1996 Mitsubishi Eclipse RS-NX 75 shot, AEM CAI, P&P t/b and intake mani-SOLD

1964 Buick Electra 225-all original, all power options, 325hp, 445ft/lbs tq

Isn't Power Aid a drink?

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

Yeah wtf. I thought this was the little brother of my Gatorade catch can!

____________________________________________________
four nails four corners four riders and four horses