Can you use lock washers with these gears to help them to NOT slip? The gears only have 3 bolts!

venomtalon@aol.com

Performance Mods: Custom CAI, Jeep 60mm TB, Ported Intake Manifold with Jeep TB match, 5 angle valve job, Head milled .020, Regrind Cams, PT Lifters and Rockers, AEM Cam Gears, OBX Wires, NGK Plugs, AFX UDP, OBX Header, OBX

I think they recommend you to use Lock-tite after you have your gears set the way you want them. What are lock washers? What do they look like? Mine didn't even have any washers at all...

eclipse804@hotmail.com
http://www.importvenom.com
Import Venom - Parts and Performance

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

YES i would definitely put lock washers on them..

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

man i have had these gears on my car for a year now, i adjusted them like crazy, i never get slippage, why is everyone so trippin on them slipping, just tighten them to spec and they won't slip, if you don't spend the time to torque them correctly then you deserve to have them slip and tweak all your valves
lates
james

Rest In Peace Heidi Doggy

why would you buy cam gears and then just put them at specs.



Grey 97 Eclipse GS
Greddy Evo cat
Greddy header
AEM CAI
Sprint 2" drop

www.artexmusic.com

97' grey gs/Greddy EVO catback/Greddy header/AEM cai/afx udp/dropped on 2" sprints

I think he means tighten them to spec., to avoid slipping.




Eric Madden
99 GS

- K&N cone
- 5E plugs
- Magnecore 8.5
- GS-T exhaust
- Some electronic stuff

So what should I torque them to? I got them used.

venomtalon@aol.com

Performance Mods: Custom CAI, Jeep 60mm TB, Ported Intake Manifold with Jeep TB match, 5 angle valve job, Head milled .020, Regrind Cams, PT Lifters and Rockers, AEM Cam Gears, OBX Wires, NGK Plugs, AFX UDP, OBX Header, OBX

http://members.home.net/xtatdsm



15 lbs


Adel


Ported TB and Intake manifold ** ported and milled head ** PT rockers and lifters ** Crane Drag cams #16 ** Crane valve springs and retainers ** AEM cam gears ** Hotshots headers ** Greddy Cat back ** Iceman CAI ** S-AFC ** and the usual handling mods

Whats up Adel? Did you get the car over there yet?



http://hometown.aol.com/ohshootuhh/

All Motor Beast in need of MAJOR TUNING

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

http://members.home.net/xtatdsm


yeah I made it here (UAE) on 10/29. the flight was not as bad as I thought it would be, well they searched the hell out of me in SF Airport, but that's understandable, I had no problems in London airport whatsoever tho.

anyway I am still waiting for my car to be here, it should be here in 3 weeks or so (damnit I can't wait)

oh I am driving my cousin's car untill my Eclipse gets here, it's Maxima, and let me tell you this, those cars are not as slow as we all thought, the thing picks up hella fast and goes easily to 140 mph in no time.

Adel


Ported TB and Intake manifold ** ported and milled head ** PT rockers and lifters ** Crane Drag cams #16 ** Crane valve springs and retainers ** AEM cam gears ** Hotshots headers ** Greddy Cat back ** Iceman CAI ** S-AFC ** and the usual handling mods