Just wanted to let you all know that I got the motor in. Just got back from the break in run. It runs sweet, sounds sweet, and looks pretty sweet. Fired up on the first turn and it turned out the only thing I forgot to do was hook up the alternator, but that was no biggie. While I was driving it felt like the timing was off a bit when you really goose it and I'm not sure if it's from the cams(Gude), the new cam gears(Bomz adjustable), or just that the computer was reset. Mechanically the timing looks perfect and it really runs like a striped ass ape when you ease into WOT so I think I'll run it a bit and see what happens with that. I got is a little piston slap with the CP 10.5:1 pistons when it was cold - no biggie. Its finally loping at idle like it should. My old timing belt was just wasted and I think my tensioner wasn't doing so well either. Its got a nice powerful loping sound now at idle - very sweet.

I took a good bit of pictures that I'll post tomorrow. I'll try to give a bit more info about my head and intake manifold as well. Time to sleep.

IT RUNS!


95 Eclipse RS : 5 speed
15.7 @ 87.9mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

congrats! What are you using to pull fuel at idle to get it to stay running?

best time so far 14.3 @ 101.1mph

Very Nice Jim! Look forward to more reviews.

His cams are regrinds and won't be as agressive as your Crower Stage 2's, so less is needed to fool the ECU.



http://www.exileracing.com
una salus victus
Mods List: http://highlander.dsmpower.com/sig.htm

congrats Jim !!!!



Hello Mr. 12's . How are you today ?


Member # 333

Been a while man.. havn't seen you post for evar. Congrats on getting that thing running on your first shot. I'm about to put mine back in too, hopefully I will have the same luck. Are you going to stay NA?
Nick
97RS

turbo8u> shut your SUCK
ZAO684: NIPPLE warning...maybe>?
turbo8u> yea i was a window licker on the short bus in junior high

Congrats! Just curious, but do you plan to stay all-motor with the 10.5:1 c/r or do also plan to add turbo?

___________
Kon C

"Sometimes, a man has to do what a man has to do."

wooot! can we get some audio?

congrats jim..

the big question is did you have fun and was it worth it?

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

Thanks guys.

Hell yeah it was fun. From the test drives I did today I'd say it was well worth it. The suddun WOT issue went away, probably a computer reset gremlin.

Michael is right about the cams. The Crane 2s have 10 more degrees duration and 7 more degrees overlap then mine. I'm using the stock injectors and fpr and it seems to be working just fine.

I don't plan to stay N/A. I've been putting together a turbo system for a while now. This rebuild was just in response to a decline in compression on the old motor. I've been keeping track of it and it has just been going down to the point where I was running like 180-160. I didn't want to boost on crappy compression, so I put in a good motor. The pistons are 10.5:1, but with the deck and head milling the compression should be somewhere around 10.7:1 which is just about what I wanted it to be(11:1). I'll be using an 8 injector system and if you notice in the pictures you'll see that I installed the modified manifold with this new motor. The EIC, FPR, filter, and hard lines(from engine bay to tank) are already installed, it'll just be a matter of swapping in my modified fuel rail and a few new lines to get that fuel system all hooked up. I still need some piping, gauges, and a couple of other little things to get the turbo system running. Should be fun - I'll keep you all posted on the progress.

Some audio? Ok, I did the best I could with my crappy little external mic - http://www.dimensia.com:81/jimbo/netfiles/NewMotor.mp3

...and some pictures.

Heres my old head with a facelift from Jess Miller's Machine shop in West Chester PA did the work on it. Glass bead cleanup, 3 angle valve job, and a 5 thousanth mill. The head guy(Dave) is definately gonna do the port job when I get it done. His work is spectacular.


Here's my little helper. You can see the new Bomz adjustable gears in this shot. Blue anodized - mmmmmm. They seem to be working just fine. You can also see the secondary rail on the intake manifold. I was a bit worried about clearance when installed, but as it turns out there's still plenty of room back there.


Here's both my helpers. My brother-in-law Steve came over to help me install it. I started at about 1pm on Saturday - first order of business was to go to Sears and buy a 12pt 1/2 deep socket to finish torquing the head. From then till 4am Sunday we just put in a marathon of work to get it finally assembled and installed and running. Definately couldn't have gotten that far in one day without his help. It was cool. In this shot he's fabricating an EGR block off plate from some stainless stock.


The 10 million BTU fart-gas powered Eclipse....or just me in the engine bay.


Yeah, it was definately worth it.



95 Eclipse RS : 5 speed
15.7 @ 87.9mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

jim you got gray hair man!

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

Jim...do my car next:bowdow

What are you doing with your old cams?
Can't wait to race again when the weather gets nicer.

Your set up looks beautiful...{/jelous}



"And my jam knock in the Mitsubishi
Girls pee pee when they see me,
Nava-hoes creep me in they tee pee..."
>Biggie Smalls -- R.I.P.

Higher compression with aturbo, the only way to fly a turbo, I'd never drop C.R. for boost. I can't wait to see the final product scream.



http://www.exileracing.com
una salus victus
Mods List: http://highlander.dsmpower.com/sig.htm

Nice job, can't wait to see what it does with a turbo!

"Tutto fa brodo."

Todd Scungio
98 RS
15.173 @ 90.70 MPH

And also a 2011 Ralliart

man your engine sounds pretty diesel! damn and your engine looks so clean. i wish mine looked like that. awesome job man, when you get your turbo system hooked up, you're gonna be a beast.

awsome man, sounds sweeet

_____________________
98 Silver Eclipse RS ATX
CAI, header, bored TB, Apex N1, Pro-kit/Tokico combo, custom lower tie bars, cross drilled/slotted rotors