I have an ATX tranny. Some say they will and apparently have done it with modification, others say they won't AT ALL!! Road Race engineering states the below;

"They are different on the auto and especially on the NT AT motor. They would
not work. There is too much air gap. You may want to do the urethane fill
mentioned on our tech tips page.

Mike W "

I trust their word but am curious how you guys whom say they fit got them to?? Drop me a line and hook a brotha' up! I just don't want to spend hours on that B&%@ch of a rear mount to find it won't work, even after shaving 1/4 inch of each side of the insert as some of you stated is the cure! HELP!

Second Place "Sanford Sound SLAP 2005" Mild 2-Door
http://www.sanfordsound.com/carwash2005.htm
Second Place "Scrapefest 2002" 2nd Gen Mild
1995 GS AT, 97-99 Conversion.
2000 BMW Z3 2.8
1999 Chevy K2500 crew cab
5 jets skis, 3 snowmobiles, 2 ATVs. BRAAP!
Member # 1147

i believe the correct answer is the front will work but not the sides....not sure about the back. At least, thats the experience I had with them in my ATX.

---Harry. My car topped out at 140 this morning. I need "turvo." Two of 'em. And Harry, I need the glue to be dry by tonight.---








engine:Je Forged pistons .20
Eagle connecting rods
crankscraper
3-angle valve job
mild p/p
Crower stage 2 cams
Crowers valve springs
Aem cam gears
Pacesetter 4-2-1 headers
AEM V2 CAI
Unorthodox underdrive pulley
Final Drive gears from 99 Stratus
Transgo shift kit
Hayden 6 pass trans. cooler

The front will work but the back will not.

****************************************
Formerly Gay
*TOTALLED* =(

The front works with a little shaving... make sure to use the big metal washers.

The back simply won't work. The little fingers are too close together, you'd have to cut them off almost completely.

I have a set of fronts for sale, no washers, $10 shipped.

The fronts will work with zero shaving imo.

I didnt do anything to them. The rear will not fit because the auto trans is heftier than the manny trans and needs the added support from the mount.

That is why you have to shave off some of the mount itself for using it with an auto.

Just put the front one in, it is the same as the manny trans. And you will notice a nice difference in power.

****************************************
Formerly Gay
*TOTALLED* =(

Thnaks. I will use the front!!

Second Place "Sanford Sound SLAP 2005" Mild 2-Door
http://www.sanfordsound.com/carwash2005.htm
Second Place "Scrapefest 2002" 2nd Gen Mild
1995 GS AT, 97-99 Conversion.
2000 BMW Z3 2.8
1999 Chevy K2500 crew cab
5 jets skis, 3 snowmobiles, 2 ATVs. BRAAP!
Member # 1147