#61955, "where to get the "other reubild" stuff ? not the fun internals, but..."
things like better head gasket, ARP rod bolts & head studs, timing belt stuff, etc? all the parts that make a rebuild successful!
USED TO HAVE...Everything you wish you had, and then some...
You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)
#61958, "RE: where to get the" In response to Reply # 1
goodyear gotorback belts=autozone 45.00 for timing, 15.99 for alt and 15.99 for ac/ps, you can also order a complete uppergasket set from howell, which includes headgasket/im gaskets/egr/valve cover/spark plug o rings/cam seals/cam position gasket goes for around 90 total, as thura said, arp from summit, or you can get the mopar ones from dodge for around 30 dollars, call bob kise at fenton dodge. go to www.neons.org, then i think click vendors, and look for forum dodge, ask for the 2gnt discount, hell hook you up, hope that helped chris
#61980, "RE: where to get the" In response to Reply # 3
yea, i got the upper and lower gasket kit and timing belt maintenance items from bob kise. arp studs i got directly from arp. other stuff you can pretty much get at autozone.
______________________________ Matt D. '06 Evo IX SE '98 RS-T 13.8 @ 106.1
#61998, "RE: where to get the" In response to Reply # 4
Yeah, the best way to get ARP stuff if from them directly. They ship it out fast. ARP rod bolts come with eagle rods I believe. Upper gasket set is about $80 from our buddy bob kise.
____________________________________________________ four nails four corners four riders and four horses
#62032, "RE: where to get the" In response to Reply # 5
tim ya never called me back, what happened?
get the gasket kit from fenton (bob kise) 80$ for all of it
eagles use arp2000 rod bolts
clevite bearings can be sourced at napa schucks or any local machine shop,
you dont need arp main bolts unless your are bad (doubtful)
arp studs or head bolts would be nice not neccisary though..
make sure the machien shop does a very smooth finish on the head and deck other wise yur mls wont seal under 40ma is prefered
make sure the oil holes are cleaned in the block too
you can get a melling oil pump or topline... people have been blowing up the melling i ahvent had a problem with toplines yet and i guess clevite now makes a oil pump tooo...
napa is now selling the tensioner and belt and idler pulley as a set..
Bill tim my new number is 509-342-0605 let me know if you need more help or still want to use my machine shop
You can have it cheap, fast or good. Pick any two.
If you want it cheap and fast, it's not going to be good. If you want it cheap and good, it's not going to be fast. If you want it good and fast, it's not going to be cheap.
Search
Printer-friendly copy
1 User in Chat
