how much would a headgasket for a 97 GS be? i have an oil leak and i need to replace it which i think im going to try on my own.

RIP 97 GS

1990 Nissan 300zx Twin Turbo - STOCK

__________________________________________
~Chris
03 SRT-4

do dealers sell kits that include all of the gaskets that you are going to need to replace at the same time? (exhaust manifold, intake manifold, etc) how much are those?

Dealer.... not crap-to-zone

__________________________________
-Ryan

actually i just finished my headgasket job like a day ago and the headgasket that was included in the headset was freaking nice. the whole headset was made by felpro. they have mad gaskets in the headsets. i got the head set from autozone. all very nice for a very not nice price of $103.99

There is a *world* of difference between the head gaskets that come in the autozone/felpro kit and the Mitsu 4-layer MLS. I got the Felpro complete kit for a stock motor I built, but then just threw away the Felpro headgasket and used a new OEM.

hrm, guess the guy at autozone was a moron...i specifically asked for MLS....turned out to be my water pump anyway

__________________________________________
~Chris
03 SRT-4

You can call up Bob Kise in MI and get the whole upper gasket set.
-intake mani (2 pieces)
-camshaft position sensor
-valve cover w/ plug gaskets and grommets for under bolts
-exhaust mani

GET THE MLS
Make sure it's a metal gasket made up of multiple layers of metal. I don't know what the Felpro looks like, but the real MLS is hardcore. Metal with riveted edges and all that.

Do you really want to do this again without putting in pistons and rods and all that?

Is there a website or tutorial of how to replace a headgasket on a DSM specifically? or if not can some1 give me a link to a good tutorial on it because i want to start on it this weekend thank you.

RIP 97 GS

1990 Nissan 300zx Twin Turbo - STOCK

felpro is metal too, the exhaust manifold gasket is anyway.

bobin' and weavin' in traffic. No other place i'd rather be .



^^^^^EVERYTHING HAS TO GO.

hmm

A Felpro HG would not be the way to go imo, unless you were running high boost and were afraid of warping the head if ever the hg were to blow. I think Mitsubishi made the 420a hg with the cheaper floppy kind than realized later that was a mistake, so now I think you can only get the MLS from the dealer.
A MLS gasket is choice. The head will blow before a metal HG ever does, so in the future , be careful how you tune. But everyone knows this so this is redundant.