from howell automotive:

United Parcel Service (1 x 16.5lbs) (3 Day Select)

Products
1 x AF/X 30% Underdrive Pulley 2.0 Diamondstar $140.00
1 x Fidanza Engineering 2GNT Cam Gears $229.95
1 x Crane DOHC Camshaft Kit #0012 $399.95

Sub-Total: $769.90
Shipping: $0.00
Tax: $0.00
Total: $769.90


now I get to spend another ~$400 next week for a shop to install all of it! don't got any dyno floating around, that I know of... so I'll just have to use the butt-o-meter

- robin

Or spend $400 dollars on tools and do the work yourself , and have tools for your next mod!





15.9 @ 86.7mph

Smooth idle? We don't need no stinking smooth idle.

Mods List:
http://highlander.dsmpower.com/sig.htm

>Or spend $400 dollars on tools and do the work yourself ,
>and have tools for your next mod!

werd.


_________
96 talon esi-t
san clemente, ca

Uberingram> I bow down to the Geo

$400 dollars worth of tools :o

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

or spend $3000 when I break the engine. really, I had a bad enough time installing an air intake... engine work ain't for me, the rest I can handle.

- robin

get a local dsmer to help ya and do it yourself..

cam gears cams and a UDP install is not that hard....

Bill

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

well, closest DSM-er I know of is todd, and he lives in rhode island last time I checked... then again, stowe mass would be closer if I knew where that was (and could remember who's from there)
I live about 1/3 the way up I91, just for the record.

- robin