my car is modified crazy style so these codes aren't abnormal i dont think, but i thought i would ask..

im getting these codes:

-----17 PO403 32 EGR solenoid circuit Harness and connector / Electric EGR transducer solenoid / EGR valve / EGR tube clogged / Vacuum hoses

I have no EGR system in the car anymore, so this is a no brianer.

-----27 PO123 24 Throttle position sensor voltage high Harness and connector / Throttle position sensor

I replaced tps sensor yesterday and im still getting this code, even after erasing the codes.

-----58 PO113 23 Intake air temperature sensor voltage high Harness and connector / Intake air temperature sensor

I have a brand new sensor in there which is only 2 months old. Could it have gone bad already?

---- Im also getting a code PO140 which is not listed on this site. 139 and 141 have to do with the fuel system.. but like i said.. no direct information on what this is.

any help on these?
thanx
James

Yeah i don't see a P0140 either...

I would look into the wiring harness at this point possibly a bad ground if the error codes are coming from the sensors there...



15.9 @ 86.7mph

Smooth idle? We don't need no stinking smooth idle.

Mods List:
http://highlander.dsmpower.com/sig.htm

P0140 Lambda probe switching circuit no activity detektiert (bank 1 sensor 2)

thats the o2 sensor rear I beleive

I would check to make sure you dont have a burnt harness or a cut in it. Thats obvious from the wierd sensor malfunctions tps,etc.. check that harness.

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

ill check it out and make sure nothing is fried or cut or something.. who knows.

thanx for the input!
James

The CEL means you are making a lot of HP. If I didnt have a CEL I would think my car is messed up. I dont even bother reading the damn codes because there are so many it take to long. There comes a point in a 2gnt that the CEL is a waste of time to even look at.

Dave
05 Ford F150 SuperCrew FX4