not the NRG suspensions inserts, but the actual prothane kit that does all 4 mounts.

on the timing belt side mount, the stock hole is in the middle, the holes in the prothane inserts are off-center. do i have ones for the GST/GSX? will these work?
if these will work, how do you remove the stock insert in the mounts on sides?

help!

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

anybody, please?

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

do to the way the two engines are mounted i do not believe any motor mounts designed for a 4G63 would work in conjunction with a 420A. Might want to check with some of the big dogs on that but as far as i have heard they are not similiar. (hope that is what you are asking)


VW= The joy of driving
DSM= The frustration of fixing

The rubber in the side mounts can either be pressed out or burned out. I like fire, so I would burn them out. The 2G-T mounts have the same part numbers as the 2GNT, so I am sure that they could be used. Just make sure that the sleeve in the mount on the timing belt side fits properly in the hole in the prothane mount before you start burning!
Let me know how they work out...
-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

Yeah with a lot of force they can be pushed out... unless they are old and really beat up thn they can fall apart...

I know Juan had the Prothanes, but I'm not sure if it was front and rear or all four. He hate the vibration and got rid of them. But he's out of town to ask any questions of anyway...

Good luck.



15.9 @ 86.7mph

Smooth idle? We don't need no stinking smooth idle.

Mods List:
http://highlander.dsmpower.com/sig.htm

i ahve the gst/gsx mounts u must remove the old center cartridge and install the prothane ones after that your good to go y0!

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

thanks guys. i bought Juans old ones from him. he only used the front and rear ones. His were from an older style kit where the side mounts had the bolt hole placed off-center, thus making them not usable. I called prothane and they are sending me the new correctly holed ones for free!!! Gota love free-bes!

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)