Outlaw Engineering has just completed the prototype ThermoBlok spacer kit for the 420A and 4G64 2GNT Eclipse engines. We are now in need of a local volunteer to allow us to install and test this new product. We will install and test the kit for free. We would prefer to use a manual transmissioned car in good condition without extreme mods. I/H/E is OK.

We recently tested it on John Suddeth's 98 Neon R/T and experienced 3-4hp/3-4ft-lbs torque gained. However, the Neon 420A manifold has the coolant passage integral with the intake which was therefor heated regardless of the spacers. We feel that greater gains are possible in the Eclipse version of the 420A.

If you are in the northern Indianapolis area and are willing to have us tinker with your Eclipse, please contact us. For additional info go to our website at www.outlawengineering.com. There you will find info on what this product does and what would be required for the prototype installation as well as contact information for us.

I would so try this out but i live in RI. Please tell me someone has contacted them. This could be a good chance for a good product for us 420A guys

1997 Dodge Avenger I-4 5-Speed
DreamSpeed Cold Air Intake,AF/X Under Drive Pully, ES Motor Mount Inserts, MSD DIS2, MSD Coil Pack, MSD 8.5mm Wires,Aluminem Flywheel,Spec Stage1 Clutch,Crank Scraper, Quaife LSD,Airmass 4-1 Headers, Test Pipe, Bosal Catback,B&M Short SHifter(50%),Symbroski Shifter Kit, Grounding Kit, Solid Front Motor Mount

whats with all the crap being made in indy? come out to the northwest and make shit. someone go test it, i know there are indy people on these boards.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

My mods are out of the range of what they are looking for...



15.9 @ 86.7mph

Smooth idle? We don't need no stinking smooth idle.

Mods List:
http://highlander.dsmpower.com/sig.htm

Did somebody go do this??

Didn't corbin make these for a while too?

Kevin
The old:


The new: