Tell me if I'm hooking this thing up right or not. I plug the cable into the port under the dash near the steering wheel. I go into the PDA, go to pocketlogger, go to Byte Timing, hit reset, and then I wait....and nothing happens. No Data Capture rate or anything. I go down where it says Test-Inter-Packet Delay, click Run and wait...and nothing. I'm doing this all with the car running so, am I missing something here???

1996 Mitsubishi Eclipse RS - Sold
1992 Eagle Talon TSI AWD
1999 Dodge Ram 2500 4x4

TTT - not having much luck.

1996 Mitsubishi Eclipse RS - Sold
1992 Eagle Talon TSI AWD
1999 Dodge Ram 2500 4x4

Hey, first off make sure you have the beam feature turned on (pref > general > beam). Then go to Byte Timing, when you press reset it should put the varibles at like 5000, and 50 I believe. It should work w/ them like that. See if it does. Then to improve your transfer rate you need to run the Inter-Packet-Delay test first, 37 worked flawlessly for me, then run the Byte-Delay test, 3900 worked the best for me. I logged a 2 hr trip today, no errors. I have a '95 though (which isn't genewine obdII) so the delays may very for you.

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician