ok today my cel light came on AGAIN and this time after doing the keystroke on the ignition it blinked in this order..

1....2....3....5

once then twice then thrice then five times. what the heck does this mean? i have a chiltons and my 95 falls under the OBDll diagnostics, i was tryin to figure it out but what does the "P" in front of everything mean? how do i read the problem codes? any help appreciated..thanx fellas

SoCal Meet Sept 04'

it is read as 12 and 35. the 12 means that the ecu has been disconnected recently or something like that. no worries about that one, it ll go away. the 35 means Low speed fan control relay circuit. check the wiring or it could mean that the low speed fan relay is bad. people, correct me if i am wrong. hope that helps.

btw, the p codes are for the scantool. which is useless to you unless you have one. i use this page using the CEL column:

http://www.2gnt.com/nuke/modules.php?name=Sections&op=viewarticle&artid=8

thanx for the page link, it was actually code number 23 the IAT Sensor, i read it wrong, but now i replaced it and CEL light is off...............for now...lol thanx for your help

SoCal Meet Sept 04'