ok i blew my clutch so my car was down for 2 months while it was down i put in a clutch master stage 4 clutch and aluminum flywheel. I also installed AEM Cam Gears and AFX UDP. Well when i got back on the road it was running like shit there was no power. I ran a 10.1 with a slipping clutch and bad motor mount and hit a 10.3 after the recent work. My blinky A/F was staying on solid green so i replaced the front 02 with a bosch( i know there not the greatest but i had to try something) and now it doesnt read unless i'm giving it gas it only bounces when i give it a little gas i thought it was surposed to bounce unless ur full throttle? Ok now the car is running lean hitting a 87 and a 12.2 on the Apexi TT and the blinky one is in the all the way accros the yellow and one green is lit. The car just doesnt have the power it should if u guys have ne ideas for me to try please let me know. Also pulled off the udp and cover and checked the marks for the cam gears and they looked good. Can u test the timming with a test light on ours if so i try it like that again to make sure for a thrid time.
Thanks in advance for ne help u guys give me

i also got a safc 2 and all the settings r set at zero stil and i'm not turbo yet i planned on it being the weekend project but i need to find out what is wrong first

;(

could it be my factory fpr or somethig? It seems like it starving it self up top and thats why it doesnt have power. It's reading .94 below 4 but above that it just drops to around .82 any have ne ideas

you installed cam gears.... make sure they are set properly... Seems like it got worse when you installed the O2 senser, check that, if not replace it with a new one from the dealer. Try your fuel filter that could be it also... check your air filter, change your oil, Trouble shoot... that's the best advice... GOOD LUCK!!

I use to have a White 99 GS Sport with a Star Stage II Ball Bearing T3/T4 turbo...it was fun untill....well those who remember me know Oh Ya...this is what I have now... a 99' GSX...

>you installed cam gears.... make sure they are set
>properly... Seems like it got worse when you installed the O2
>senser, check that, if not replace it with a new one from the
>dealer. Try your fuel filter that could be it also... check
>your air filter, change your oil, Trouble shoot... that's the
>best advice... GOOD LUCK!!

You should stop posting mang. Everytime we see your car we all go into convulsions and pee ourselves with glee.

__________________________________________
~Chris
03 SRT-4

the o2 helped before it just stayed solid green now it bounces also it getting more fuel then it was before but still lean. I checked the timming and it was good also i changed the fuel filter and put some fuel system cleaner in it. So i'm thinking it might be my factory fpr or fuel pump. I've got a walbro 255 that came with my turbo kit would it hurt to go ahead and insall this to see if it helps? thanks for ne help guys