LAST EDITED ON 30-Jul-01 AT 02:38 PM (PST)

i found out that Hooker has a header for us.. anybody have this? it should be cheaper than the greddy's and the bosals... how do they compare with pacesetters?

anyone know if they are 4-1 or 4-2-1?

i personally can not sacrifice any more low end torque so i am hoping they are 4-2-1

Marc
'98 GS AT
Magenta Gray Pearl
NGK Plugs and Wires
AEM Short Stack
GS-T Exhaust
Bored throttle body
Bored Intake manifold
AFX underdrive pulley
RRE Front Lower Bar

'98 GS AT.Magenta Gray Pearl.Accel Spark Plug Wires.NGK Plugs.AEM Short Stack.GS-T Exhaust.AFX Underdrive pulley.RRE Front Lower Bar.Tenzo Rear Upper Bar.Tenzo Rear Lower Bar.Tenzo Front Upper Bar.Energy Suspension Bushings.Energy Suspension Motor Mounts.

i saw the topic and thought it was about prostitution. but hooker has been making quality headers for domestics for years. the should know thier $h!t.

Chris Dishmon
chrisdishmon@hotmail.com or
chrisdishmon@yahoo.com (pretty original, huh?)

I have no really neat sayings to post here and too much $h!t done to my car to post either! Just visit my web site.

http://klipzracer.homestead.com/index.html

LAST EDITED ON 30-Jul-01 AT 06:46 PM (PST)

http://www.martelbros.com/hooker/3.htm








-Automatic tranny
-AF/X underdrive crank pulley
-AEM Cold Air intake
-PIAA headlight and foglight bulbs
-Clear bumper lenses
-Eibach Pro-Kits with Tokico n/a shocks
-Pilot Motorsports Front upper, Rear upper, Rear lower strut bars
-PowerSlot rotors (all four)
-Axxis Metal Master pads
-RRE rear camber kit
-Dunlop SP SPORT 8000 tires
-ECLIPSE word on dash
-Red Mitsu symbol on steering wheel
-Painted fog light bezels
-Window tint
-Magnecore wires and NGK plugs
-Purple interior lights
-Purple hose kit
-Sony Xplod MP3 Headunit
-Cerwin Vega 6x9's in the rear
-Cerwin Vega 5 1/4's in the front
-Dynamat for all speakers

that they were not gonna make one due to the low demand.


KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/4 inch exhaust
Empty Catalytic Convertor
225/50/16inch Wheels and Tires

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

I went to Summit Racing and it says its on back order, but it will be ready to ship again as of august 28 of this year.


--Sean B

97' Talon ESi
"Our time is here, Our time is now, Team 2gnt."

Original 15 of 2gnt.com

i called 1-800-882-7223 spoke to a guy who was patronizing and rude.. he said that it was $209.95.

it's a 4-1

anybody have this setup yet?

'98 GS AT
Magenta Gray Pearl
NGK Plugs and Wires
AEM Short Stack
GS-T Exhaust
Bored throttle body
Bored Intake manifold
AFX underdrive pulley
RRE Front Lower Bar

'98 GS AT.Magenta Gray Pearl.Accel Spark Plug Wires.NGK Plugs.AEM Short Stack.GS-T Exhaust.AFX Underdrive pulley.RRE Front Lower Bar.Tenzo Rear Upper Bar.Tenzo Rear Lower Bar.Tenzo Front Upper Bar.Energy Suspension Bushings.Energy Suspension Motor Mounts.

yeah i would rather go with someone else just cause of the name. when you say hooker headers old chevy's and fords come into mind i hate those old ass cars i'd stick with brospeed and names that are more commonly associated with imports. keep import tuning to the companies that have always done not to the domesticar companies that are jumpin on the wagon now that there's "a large revenue oppurtunity"

I hope you know that your very own car is a domestic.




KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/4 inch exhaust
Empty Catalytic Convertor
225/50/16inch Wheels and Tires

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

in the words of nelson muntz..."ha-ha"


_________________________
...just my $.02
95 GS

____________________________
My $.02
95 GS

AMEN Fast420A!

Besides Hooker has been a big name and a proven performer, in dyno test after dyno test. Import or Domestic the pricipals that guide a good header design don't change.

"It's all in the reflexes." - Jack Burton
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins, Red Silicone Hose Kit, 8.5mm Magnecor Wires, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads, S-AFC

To Be Installed: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and Carbon Fiber Pads, SS Clutch Line, Rear Motor Mount Ins, EGT

Waiting for: Front Lower Tie Bar, Ported/Polished Intake Manifold

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Don't know much about Hooker but Whores i know about.. JK
.. For real thought... i would tend to think that the header design for our cars will be very close to other companies.. Get what you like and what fits the budget.. I love my Greddy and all but the name is pricey..

97 Eclipse RS
AEM CAI (replaced the Weapon-R)
GReddy SP Exhaust
Greddy Headers
AF/X UDP
Upper Front STB
16" Rims/Dunlop SP 5000
Magnecor Wires
PowerSlot Rotors
Atezza Taillights (Who Doesn't)
NX System.. (waiting to arrive)

since i got a chrysler engine i'm puttin a "mopar performance" sticker on the hood!

Chris Dishmon
chrisdishmon@hotmail.com or
chrisdishmon@yahoo.com (pretty original, huh?)

I have no really neat sayings to post here and too much $h!t done to my car to post either! Just visit my web site.

http://klipzracer.homestead.com/index.html