Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 1 User in Chat
Top 2GNT Technical Performance/Engine topic #57279
View in linear mode

Subject: "Hesitation problem after rebuild!" Previous topic | Next topic
pea_jayAug-16-03 05:13 PM
Member since Jun 01st 2003
415 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57279, "Hesitation problem after rebuild!"


          

Ok i searched and found a few different sources. Ok, it did it before the rebuild, but not as bad. Could my catalac converter be stopped up? Or maybe spark plug wires? I checked the wires and it seems there is some rust on the 2nd and 3rd wires. I dont guess the previous owner took that much care of it. So could these be my problems? Also, when i checked my plugs, i had oil on them. Does anyone know the cause of that? Thanks in advance

96 Eclipse Base 5 spd
Rebuilt engine w/ forged internals, APC Air Filter, Clear bumper lenses, 15" ICW wheels, Alpine v12 amp, 2 12" Xplodes, 5.6" lcd monitor, Dvd player, Playstation 2, Power1 Exhaust, Aerospeed Wing, Altezza tails w/ painted center, 20% tint, Silver Graphics, Audiovox alarm system.

Big transformation underway this winter!

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic
RE: Hesitation problem after rebuild!, REV_GSlow, Aug-16-03 06:18 PM, #1
RE: Hesitation problem after rebuild!, pea_jay, Aug-17-03 05:21 AM, #2
      RE: Hesitation problem after rebuild!, steve0677, Aug-17-03 05:45 AM, #3
           RE: Hesitation problem after rebuild!, pea_jay, Aug-17-03 05:58 AM, #4
                RE: Hesitation problem after rebuild!, steve0677, Aug-17-03 06:07 AM, #5
                     RE: Hesitation problem after rebuild!, REV_GSlow, Aug-17-03 05:30 PM, #6
                          RE: Hesitation problem after rebuild!, JWoodley, Aug-17-03 06:06 PM, #7
                               RE: Hesitation problem after rebuild!, 420AYE, Aug-18-03 01:48 PM, #8
                                    RE: Hesitation problem after rebuild!(Update), pea_jay, Aug-18-03 07:08 PM, #9

REV_GSlowAug-16-03 06:18 PM
Member since Apr 26th 2002
1312 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57281, "RE: Hesitation problem after rebuild!"
In response to Reply # 0




          

Number one, change your plugs and wires. Number two, order a valve cover gasket set from your local parts store and replace them. Number three, does your exhaust sound muffled? If so your cat "could" be clogged. How many miles do you have on the motor? Let me know and i'll help you out as much as i can.


EclipsedChef was my first name..Member #460!

::::..Under Construction..::::

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
pea_jayAug-17-03 05:21 AM
Member since Jun 01st 2003
415 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57306, "RE: Hesitation problem after rebuild!"
In response to Reply # 1


          

Well i just rebuilt the motor 1k ago. It has all new gaskets everywhere, new plugs also. I just dont know what to do anymore but its really getting on my nerves

96 Eclipse Base 5 spd
Rebuilt engine w/ forged internals, APC Air Filter, Clear bumper lenses, 15" ICW wheels, Alpine v12 amp, 2 12" Xplodes, 5.6" lcd monitor, Dvd player, Playstation 2, Power1 Exhaust, Aerospeed Wing, Altezza tails w/ painted center, 20% tint, Silver Graphics, Audiovox alarm system.

Big transformation underway this winter!

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
steve0677Aug-17-03 05:45 AM
Donating 2GNT member
1464 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57307, "RE: Hesitation problem after rebuild!"
In response to Reply # 2


          

check the first o2 sensor



03 rally red evo viii - stock
cardomain page
http://www.cardomain.com/id/steve0677

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
pea_jayAug-17-03 05:58 AM
Member since Jun 01st 2003
415 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57309, "RE: Hesitation problem after rebuild!"
In response to Reply # 3


          

if it was the o2 sensor wouldnt i get a cel though?

96 Eclipse Base 5 spd
Rebuilt engine w/ forged internals, APC Air Filter, Clear bumper lenses, 15" ICW wheels, Alpine v12 amp, 2 12" Xplodes, 5.6" lcd monitor, Dvd player, Playstation 2, Power1 Exhaust, Aerospeed Wing, Altezza tails w/ painted center, 20% tint, Silver Graphics, Audiovox alarm system.

Big transformation underway this winter!

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
steve0677Aug-17-03 06:07 AM
Donating 2GNT member
1464 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57311, "RE: Hesitation problem after rebuild!"
In response to Reply # 4


          

u may be right, but u can just unscrew it out and phsically inspect it.



03 rally red evo viii - stock
cardomain page
http://www.cardomain.com/id/steve0677

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                    
REV_GSlowAug-17-03 05:30 PM
Member since Apr 26th 2002
1312 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57347, "RE: Hesitation problem after rebuild!"
In response to Reply # 5




          

If the o2 sensor is dying it will not throw a cel. Mine was going bad and i could tell that it was dying, my gas mileage was aweful and i had a stutter in acceleration. I would replace it anyways if its stock, seeing that you just rebuilt the motor and all. Muffler shops can test your cat in 15 minutes or so, and its pretty cheap too. Hope this help emoji


EclipsedChef was my first name..Member #460!

::::..Under Construction..::::

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                        
JWoodleyAug-17-03 06:06 PM
Member since Mar 27th 2003
2335 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57348, "RE: Hesitation problem after rebuild!"
In response to Reply # 6
Aug-17-03 06:07 PM by JWoodley



          

did you gap the plugs properly? i went 0.044 with the ngk bkr5e-11's i put in SAT. that way with the eventual wear/whatnot they will still be gapped decently (0.045-0.050). i would check the cat out, mine started getting "clogged" around 80k miles. i'll sell u my high flow if u want it...just let me know. goodluck.

**also might want to check for vaccuum leaks, they can be a bitch.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                            
420AYEAug-18-03 01:48 PM
Donating 2GNT member
2850 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57406, "RE: Hesitation problem after rebuild!"
In response to Reply # 7


          

before you go and buy new plug wires, especially if they are new or anything, ohm them out with a multimeter. they should be in specs with the manual. not sure what it is tho. sometimes peopl have a problem with 1 sometimes 2 of the wires. just do a tune up, like fuel filter, air filter, etc. and coil pack could be a problem. there is a way to test that but i do not know how. anyone else know?

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                
pea_jayAug-18-03 07:08 PM
Member since Jun 01st 2003
415 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#57433, "RE: Hesitation problem after rebuild!(Update)"
In response to Reply # 8


          

Well today my fucking alternator went out. So i had to buy a new one. Well i bought plug wires at the same time. Seems to have fixed my problem. I'm still going to get my cat checked though, because my exhaust is sounding like muffled or something. Maybe thats why. Thanks everyone

96 Eclipse Base 5 spd
Rebuilt engine w/ forged internals, APC Air Filter, Clear bumper lenses, 15" ICW wheels, Alpine v12 amp, 2 12" Xplodes, 5.6" lcd monitor, Dvd player, Playstation 2, Power1 Exhaust, Aerospeed Wing, Altezza tails w/ painted center, 20% tint, Silver Graphics, Audiovox alarm system.

Big transformation underway this winter!

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Performance/Engine topic #57279 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.07 seconds, executing 32 queries.