Soory guys I know this is an old q. but been looking around the net and this board and couldn't find where to get a ported head ,i saw some time a go a place that one of you posted were they ported heads for around $700 with angle valve.Please i would be so happy to get some adress i'm crazy to get one to start me way to the fast track.
buy the way neon heads in that plce was cheaper so i ask my self aren't them the same and info well be most apreciated

Sorry not the same coolant inlet is on the wrong side, cam gears too... basically everything is reversed.

There are a bunch of places that do head work, you can find a local machine shop, ask around and see who has good experiences, or you can send it away to Howell, or VT, or ARD, also anybody who has experience porting Neon heads will do just fine with ours.



15.9 @ 86.7mph

Smooth idle? We don't need no stinking smooth idle.

Mods List:
http://highlander.dsmpower.com/sig.htm

Thanks for leting me know the diference.What i really need to know is where can i buy a ported head

http://www.fasterthanyou.com/4g63_heads.cfm

If you are looking for just some of the head components, machine work, or anything other than what is listed, we can work with you.

Matt
1995 Eclipse GS
2.0L, S16g Turbo, 8 Injectors, 26psi

1998 Eclipse GSX
2.3L Stroker, AEM EMS Converted to Speed Density, FP3065 Turbo, 35psi , and so on...

Are there any other options on cams in the head packages ^^^? Because I am considering going the road less traveled and building an all motor monster...

--Alpine 7893 Head Unit
--2 Alpine MRD-M500s
--2 Alpine Type R 12s
--2 Pair Type R Coaxials
^^^Mobile Earthquake^^^

Hit me up on AIM: BlackTalon96