Anyone have a picture of there cold air intake, like a picture of the filter and how low to the ground it is. My filter is only a few inches above the ground and I want to know if its to low or what not anyone have any pictures that could help.

HAHN Stage 1 \ Greddy Power Extreme 2.5'' Catback

Well, I can't help on the picture. Mine is directly on the stock tubing. However, the lowest you should ever go is flush to the bottom of you car. Otherwise you are going to be hitting everything on the street. If you are worried about sucking water in your intake I wouldn't worry to much about that. I know a few guys that have had that problem but I think the intake was completely submerged in the water. If you are paranoid about that search the boards or google for a intake bypass. That will help the car out a lot on the sucking water up. I have seen them in fish bowls and it work with the bypass. Just some thoughts. Peace.

Trevis

Mods click www21.brinkster.com/TheLiquidDrop/cr_mods.htm

I don't have a picture either, but my filter hangs down about an inch lower than my stock height talon front end.


1/4 Mile: 17.4651 | 1/4 MPH: 76.69

2gnt.fullwormage.com/files/apexiexhaust/

mine rests right by the air dam ... if u bend down and look in u will see the bottom half of it through the mesh

oRACLe's 1997 RS




ThE oRACLe says: "I've got some yellow liquid for your popcorn ... and its non-dairy .."

Mine is pretty low. I took out the little vents to get a "ram air" type effect. only problem is i have to clean the filter about once a month...damn bugs.

thats about right height!!!!!!!!!!!!!!!!

2006 WW IX MR
2003 BBY EVO VIII (sold)
256.9WHP & 277.9torque
http://s90395832.onlinehome.us/forum//index.php?sid=a70942a7f65043e6c873e12dcd300692

1998 Eclipse RS --show car--