Just finished driving around and my belt came off again. This time didn't cause any damage to the belt but at high revs they just slide off. What the hell. Is there any fix to this madness. HELP

Your Garage is not worthy
For the Masterpiece you built
That only looks like it cost a Fortune
While most flaunt their cars by going fast
You show off Standing Still

Make sure your belts arn't wobbling while idling. Usually either they are loose or the pullys are not lined up or wobbly....Check it out...

You should be able to turn belt 1/4 way while on...and then check again after about 30-50 miles


Good Luc

If you recently done a UDP install or done anythign with the crank pulley, check the alignment and that the pulley is all the way on.



15.9 @ 86.7mph

Una Salus Victus.

Mods List:
http://highlander.dsmpower.com/sig.htm