Today my PS belt slipped out. Heard its a normal problem with out cars. Is their a fix for this problem so it doesnt happen again. Thanx

Your Garage is not worthy
For the Masterpiece you built
That only looks like it cost a Fortune
While most flaunt their cars by going fast
You show off Standing Still

Not normal, it shouldn't happen. The belt could have beenso loose it slipped up, in which case just keep an eye on the tension and make sure it's properly tensioned. If you have removed an reinstalled the crank pulley or installed a UDP, make sure the crank pulley was pushed on all the way.

Also how many miles on the belt? Did it slide off or snap off? An old dry cracking belt can just break.



15.9 @ 86.7mph

Injen CAI, 55mm TB, P&P Intake, Crower Cams, Hooker Header, ERT/Catco Cat, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC