#52824, "For all you who have installed an aftermarket header please post!" Jun-08-03 08:12 AM by GS_NOOB
I just purchased an aftermarket 4-2-1 header from Rapid Motorsports and I was wondering if there was anything else I would need to install it? It comes with the header, downpipe and flex. Any extra bolts needed or any info to make the job easier please let me know!
Thanks everyone!
(Sorry guys I got so excited I got my header and did not even try to search the forum, after searching I found the same damn question about a million times so no need to reply to this!)
95' Eclipse GS Cold Air Intake Hi-Flo Cat Custom Exhaust BomZ Muffler 4-1 Header Unorthodox Racing Underdrive Pulley Bosch 8mm Plug Wires Bosch Platinum +4 Plugs Ebay Timing Advance Mod
#52829, "RE: For all you who have installed an aftermarket header please post!" In response to Reply # 0
Should need any extra bolts. The only thing I can think of that you will need that you didn't list would be all the new gaskets. Most headers do come with those. Other than that I would say patience is a virtue. Take your time on the old manifold bolts, the ones around the front of the cat if you have one, and the O2 sensor. That's all you need is to break off those junk bolts in your block or have to buy a new 02. Goodluck man. (Hopefully you won't have to refit your header as I did)
#52874, "RE: For all you who have installed an aftermarket header please post!" In response to Reply # 1
ok, do get all those rusted bolts off go to the autoparts store or hardware store and buy a can of "Liquid Wrench" its made by Gunk. Also while you are at the hardware store go ahead and buy stainless steel bolts and washers as they look better and wont rust. Get one of the bolts off and take it with you and match up the same size and threads. Get good gaskets too...not crappy ones.
Originally posted by KaptainMyke this is the greatest topic posting i have ever seen, in my entire life on the internet.
great story great attempt at racism dino goes batshit i spilt my juice i can't see my keyboard to type
this is great.
Originally posted by nappyjim make sure you let her know what the dillyo is. just tell her you was the peanut butter and she was the jelly and that night, God decided to make a peanut butter n jelly sandwhich. But let her know God dont eat peanut butter and jelly sandwhiches everyday.
#52891, "RE: For all you who have installed an aftermarket header please post!" In response to Reply # 2
get a new exhaust manifold gasket so it seals good. remove the bolts when the car is super cool. good luck. Michael 99gs (broken) Motor being built now HRC Stage 2 8-Injector Setup Stage 3 process begins 2 months till im built. hehe 2GNT Member #32 http://www.dreamwater.
#52929, "RE: For all you who have installed an aftermarket header please post!" In response to Reply # 0
i had to take a big chunk of the header nxt to water pump off with a saw za in order for my pacesetters to fit and that liquid wrench stuff really works i soaked then down at night when i parked the car then in the morning they came of like they werent tight at all
emrald green 95 esi ,custom ram air , msd ignition,bored tb, afx udp,pacesetter headers,individualy grounded hotter plugs,half way gutted interior 2610 lbs stock wheels no more ac completly removed including all the brackets no more powersteering 50 shot zex http://members.cardomain.com/tonyz007 14.4 96mph best
Search
Printer-friendly copy
1 User in Chat
