Hey, which one of you guys can claim to have the highest horsepower on a non-turbo? Exactly what mods do you have on your car to produce such gains? How much stock HP do our cars have, 140 or so, right?

Dexter Gonzalez

1995 Mitsubishi Eclipse GS
-B&M "The Edge" short shifter
-blue painted front & rear brake calipers

dgonzalez52@yahoo.com

If I had to guess, Skrilla is going to be abl;e to claim that at the moment.

"Claim Victory in your heart, and the universe will follow."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads, S-AFC, A/F Meter

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, SS Clutch Line, Rear Motor Mount Ins., EGT

Waiting for from RRE: Front Lower Tie Bar

Waiting for: Intake Manifold being ported/polished

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Skrilla... and how much would that be? what's his top speed and quarter-time?

Dexter Gonzalez

1995 Mitsubishi Eclipse GS
-B&M "The Edge" short shifter
-blue painted front & rear brake calipers

dgonzalez52@yahoo.com

LAST EDITED ON 17-Jul-01 AT 02:46 PM (PST)

LAST EDITED ON 17-Jul-01 AT 02:45 PM (PST)

Yeah skrilla takes first place in the non-turbo hp. Unles you count NOS as NON turbo.

DAVE_FL
97 T-GS
HRC stage 1
Orlando DSM

Before

After

Engine:
- ~13.3:1 compression motor on timing retard
- 12.5:1 CR on Weisco pistons
- Mutiny-reground camshafts (soon to be crower from Raizin)
- Ported TB
- Ported intake Manifold
- Ported cylinder head
- 440cc injectors (running between 40-50 percent lean)
- AEM cam gears
- UDP
- Hotshot headers (mild port)
- Custom mandrel bent 2¾” exhaust (this is new* and will be installed Saturday)
- MSD DIS-4
- HKS super-mega flow filter on my (below)
- AEM CAI
- Port matched cylinder head
- Solid MM
- SAFC

I'm guessing my crank numbers are about 175-185 which is around 35-40HP. With professional cumbustion chamber and valve work I think it can be better.

Other:
- Mild chassis lightening ~50 pounds (actually offsets my stereo)
- Battery relocated to rear passenger side of trunk
- 16x7 inch Enkei Zokus on 205 series(until my "R" rims are done)
- RMDSM AWD sway bars
- Illuminas w/ GC CO

On My G-tech I've run consistent 15.3's and 0-60 in as little as 6.5s up to 6.8s on the regular. I think I can go faster with thicker tires only time will tell. These aren't the most accurate numbers but stock GS-T's barely edge me out and win so those numbers are close enough. I can hit 150mph (the manuals top speed gear limit) almost at will, and regularly hit 125-135mph while blasting to work in the morning (at 5:30AM)
I'm too cheap to spend my money on dyno runs because that is another 50 bucks I could spend on a set of grinding wheels for my dremel or die grinder in porting engine pieces or finding another inexpensive way to make my car faster through welding cutting or porting.

Right now my biggest project is the front nuckle RM abandoned a couple years ago for bigger wider tires that will almost fit inside a wheel well. I would love to have 9" wide tires (at least in the front) for traction and cornering. It will be that until I get my 2.4L block

Skrilla
'97 Base Talon NA
"Technology: The Only Replacement for Displacement"
"Peace and Turbo Grease"

*Skrilla
"Honest officer, I thought you were trying to race me"
Talon: 1st 2.4L
'97 Prelude
'04 350Z

Originally posted by etx
Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon!

Before

After

http://members.home.net/xtatdsm



I think that would put me one step behind Skirla

- ported head, intake manifold, and TB
- 3 and 5 valve job
- milled head (I just milled it even more
- Crane #16 cams
- crane valve springs
- PT rockers and lifters
- AEM cam gears
- ice man CAI
- AFX UDP
- hothots headers
- 2.5 test pipe
- Greddy cat back
- S-AFC
- wires, plugs, and gauges


soon to come mods

- 12.5:1 pistons
- MSD so I can retard the timing on pump gas
- eagle rods
- and some major weight reduction



the car is still not running, but I just got the head back and will start putting it back together tomorow.

Adel <----- hates forcing things around ok ok here is what I meant ! why force air or NOS into your motor when you can get about the same power by helping the engine sucking more air into it J/K

Well, I'm not sure about dnyo runs, but I'd say I'm right there with Srkilla. My G-tech runs have varied from 14.9-15.3 on a good night (meaning I can catch traction) and my 0-60's have been in the 6.29 range but normally stay in the mid to upper 6's. I also have ran up against redline in 5th gear which equals out to around 150mph. Now, at the track I've run a 15.5 with blown rear struts on a hot rainy 90 degree day. My best friend owns a 97 GS-T with a drop in K&N and the free mods and I run neck and neck with him till around 100mph (we let off after that). I really need some suspension work badly as well as some solid motor mounts. I'd also like to get a pulley. I wont be all-motor for long as I have a badass turbo system sitting in the garage





"Yes, thats Shaun shooting the finger"

91 awd: 60-1, 880's, E-Prom, etc.
93 awd: JDM 6 bolt, K&N, full exhaust, Wally 255, otherwise stock.

R.I.P. the original "Factory Freak"
15.5's with short ram and catback only
1996 RS 5-speed

LAST EDITED ON 17-Jul-01 AT 11:15 PM (PST)

"Yes, thats Shaun shooting the finger"

91 awd: 60-1, 880's, E-Prom, etc.
93 awd: JDM 6 bolt, K&N, full exhaust, Wally 255, otherwise stock.

R.I.P. the original "Factory Freak"
15.5's with short ram and catback only
1996 RS 5-speed