Hey I'm putting in my Ground wire kit and have no idea what Im doing! TIA

the battery ground is pin 10 (top harness) black wire
BUT you want a chassis ground not the battery ground and there is NO chassis ground directly on the ECU, I would recommend just removing one of the torx screws that holds the black cover on the ECU and sanding it to get a good clean spot to land the cable on and install it there.

OUR ECU's DONT HAVE A CHASSIS GROUND WIRE (they are just tied to the metal on the car but there is no dedicated ECU chassis ground wire, so your adding one

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

At least on my ECU ('95 AT) there are several wires that go from the ECU to chassis ground. Some are right under the fuse box.

Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire

Mine too.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/