i blew a rod awhile back (no oil ) and im coming into 2000 on monday. what should i be looking for? i found a guy that said he could get me a 420a for 1650 installed. its coming straight out of a eclipse but he doesnt know how many miles is on it. possible to find one cheaper? also what about the 2.4 swap? the breeze engines i think? how is that going and how easy is it to swap?

that boy K-Y
kbnkb@sbcglobal.net
talonky36 (aim)

04 srt-4 (low and slo)
96 talon esi (still broke make me an offer)

NOT WORTH IT.

Look into a built engine.

________________________________________________________________________________________
Car Sold


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

www.vtengines.com can build you one for less than that price with forged internals, balanced and blueprinted rotating assembly, and all the machine work done on state of the art machinery. I'm not joking when I say that when your block comes out of their honing machine, it almost looks like a mirror. The rings will seat almost completely when you 1st start it up... its nuts.

Matt
1995 Eclipse GS
2.0L, S16g Turbo, 8 Injectors, 26psi

1998 Eclipse GSX
2.3L Stroker, AEM EMS Converted to Speed Density, FP3065 Turbo, 35psi , and so on...

>I'm not joking when I say that when your block
>comes out of their honing machine, it almost looks like a
>mirror. The rings will seat almost completely when you 1st
>start it up... its nuts.


is this what you have? so this engine is gonna be cheaper than paying 1650 for a used one... what if had this used engine had 40xxx so miles on it? is it really that much of a waste?

EDIT: ahh $1645. nice, are these rebuilt engines or brand new? obvisously is gonna be better because the engine will be one of the two
EDIT2: jus realized its only a short block. so do i have to throw my head on there? or is it the whole engine (im an engine illiterate)? using my head may face a problem cuz im not 100% sure what i did to me engine. ive 114xxx miles on the engine and wondering if buying the used one would do ok...

that boy K-Y
kbnkb@sbcglobal.net
talonky36 (aim)

04 srt-4 (low and slo)
96 talon esi (still broke make me an offer)

That price is for the complete assembled block with forged internals only. 1st, you need to find out exactly what is wrong with the engine you have. 2nd, you need to decide what type of engine you want in the future (do you want to go faster??). Once you have this figured out, give VT a call at 517-272-7728. Ask for Nick and tell him that Matt from 2gnt sent you his way. Nick will recommend to you what he thinks will suit your needs best and give you a price. From there you will be able to make a better decision as to what you want to do. If you want a complete assembled motor, they can do that. You will need to send them your head though and possibly the block as well (not sure about that one).

I currently do not have one of their engines in my car, but I will in the very near future. Their shop is located about 10 miles away from me, so I can vouch for their awesome work. I have several friends who have bought machined blocks, heads, part, custom fabricated manifolds, etc... from them and I have yet to hear a complaint. I assure you these guys to top notch work. If they didn't, I wouldnt be chucking my howell block in the garbage and installing one of theirs .

Matt
1995 Eclipse GS
2.0L, S16g Turbo, 8 Injectors, 26psi

1998 Eclipse GSX
2.3L Stroker, AEM EMS Converted to Speed Density, FP3065 Turbo, 35psi , and so on...

i def wanna go faster. but i only have around 1650 to spend, because the rest is going to a paint job im getting hooked up with (that i really need). i really would like a new engine, but im pretty sure its a blown rod. so jus a new block then throw my head on there work out good? ill prob give them a call tomorrow when i get outa school to try n work something out. thanx man for all the info so far

that boy K-Y
kbnkb@sbcglobal.net
talonky36 (aim)

04 srt-4 (low and slo)
96 talon esi (still broke make me an offer)

they have the chrysler 420a listed, is this just the 2.0? or can they do a 2.4, possibly stroke and bore it to 2.7?

>they have the chrysler 420a listed, is this just the 2.0? or
>can they do a 2.4, possibly stroke and bore it to 2.7?

mmmmm 2.4... 2.7, beautiful! sounds real good. is it possible you think matt? i didnt get a chance to call them today, mah girl had cheerleading try outs then i had to mow . hopefully some time tomorrow ill get a chance.

that boy K-Y
kbnkb@sbcglobal.net
talonky36 (aim)

04 srt-4 (low and slo)
96 talon esi (still broke make me an offer)

hah, i'll take the howell one off of your hands if you'd like, i'd be willing to pay shipping if you give me it for free!

__________________________________
-Ryan

i dunno if you'd want it with all the problems he had... i remember reading that thread. it didn't sound fun.

-marc

='95 RS 5spd Red=
Matrix CAI
A'pexi Turbo N1
Hanabi 8000k HID
SPAL Deluxe Power Windows
Nakayama GT5 17's
Ractive STB
GSX Calipers
AEM Rotors

255 is fricken short

it's probably better than the stocker i have now with 159k miles on it. but i'll take your word on it

__________________________________
-Ryan