#48773, "What does our exhaust mani. gasket look like?"
I got mine in the mail today, and its a metal composite stuff. The one on my car, stock I am assuming, is a metal multi-layer gasket. The package it came in says Mopar genuine parts, and a Mitsu sticker over it so might I have gotten a gasket for a neon?
No big deal either way, I was just curious. Its part number MO4667722.
#48775, "RE: What does our exhaust mani. gasket look like?" In response to Reply # 0
Almost all 420A specific parts you buy from Mitsu are like that - Mopar bag, Mitsu sticker over it. Doesn't matter if it "is for a Neon" or not - its the same gasket.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#48776, "RE: What does our exhaust mani. gasket look like?" In response to Reply # 1
Yeah, I wasn't questioning whether it will work or not, I can see the bolt pattern and know it works. My question is why did I get a different type of gasket? Is this the gasket that everyone gets now?
#48806, "RE: What does our exhaust mani. gasket look like?" In response to Reply # 4 Apr-10-03 04:31 PM by XtremeRS
You got the one for the Neon. IMO, that gasket is pretty crappy. Get the MLS exaust gasket, its much better quality. I know thats the Neon gasket, becuase when i got my upper end gasket kit from the dealer, i got the neon one at firt. It had some different gaskets from what i had gotten before. So i tell the dude to look it up again, and turns out sure enough it was the neon kit. Got the right kit, and this one comes with the MLS exaust gasket. For some reason, the eclipse/talon 420A's use that MLS gasket.. BTW, i asked for parts for a 95 talon, since i am building a 95 block (not that it really matters)
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
#48811, "RE: What does our exhaust mani. gasket look like?" In response to Reply # 5
Yeah, unfortunetely I ordered it online from a Florida dealer, so it would cost me more to return it then it would to just keep it. I cleaned up the MLS and it still looked great, and when I put the header on there were no leaks. I'll keep the fiber one around just in case.
#48901, "RE: What does our exhaust mani. gasket look like?" In response to Reply # 6
>Yeah, unfortunetely I ordered it online from a Florida >dealer, so it would cost me more to return it then it would to >just keep it. I cleaned up the MLS and it still looked great, >and when I put the header on there were no leaks. I'll keep >the fiber one around just in case.
Score! Good job man. I did the same. Cleaned that bad boy up with some '409' and slapped it back on there. Mine hasnt leaked yet. Be sure to get ur torque specs(18 and 20, i think..) The gasket I got from a local parts place looked like poo. Its still laying on the toolbox. Only cost me $6 though. I think its a fel-pro.
#48930, "RE: What does our exhaust mani. gasket look like?" In response to Reply # 7
nothing wrong with having a extra gasket in case stuff gets icky
turbo8u: "jiggle jiggle then vroom vroom pshhhh" -Mike Pruett 2gnt member# 976 MOPAR Stage 2 SRTForums.com member #37 (Yeah, I signed up when it first came out, and ended up getting one, cool huh?) "The object of war is not to die for your country but to make the other bastard die for his." - General George Patton (1885-1945)
Search
Printer-friendly copy
0 Users in Chat
