how do you take off the crankshaft pulley when the engine isn't attatched to the tranny???? All help and suggestions are welcome.

TIA

Dan

The 2GNT is Gone... and the curse too!!

I believe you'd do it the same way (use a 3 jaw puller), wouldn't you?

99GS MT | Star Stage 2 | GC coilovers | HurriganeGS tie bars | Tokico Illuminas | 17x7 Enkei RS5 | Baer track brakes |+

let me refraise it i can't get the bolt out that holds it on.

The 2GNT is Gone... and the curse too!!

ttt

The 2GNT is Gone... and the curse too!!

Is the motor "mobile"? If so bring it over to my house and I can take it off with the impact gun. Otherwise, you'll have to devise some way of keeping the flexplate from turning. Probably a 2 person job. Is this on Chris's motor?

Greg

'19 Genesis G70 3.3t AWD
'88 Chrysler Conquest TSI

I sat the engine on the flexplate, stood on the flexplate, and used the breaker bar from hell. You might could also stick a screwdriver through the flexplate that will jam when it hits the block.

Once you get the bolt out, you'll need a 3-jaw, 5-ton, 6-inch pulley puller that you can rent from autozone.

Impact tool should do it. At first, I couldn't keep it still. but with the impact tool, the bolt popped right out!!! make sure you use a lot of W40 or any grease/oil/lube stuff. i think it helps!

1995 Eclipse RS

I just did mine two days ago... jammed a wrench thru the pulley against the block and just used a rachet w/ a pipe for more leverage to loosen it... no problem at all

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

I jammed a big screwdriver through there. It bent, but it was Craftsman, so I just took it back and got a new one

But, if it's mobile, I suggest taking greg up on his offer. It'd be much easier.

99GS MT | Star Stage 2 | GC coilovers | HurriganeGS tie bars | Tokico Illuminas | 17x7 Enkei RS5 | Baer track brakes |+

I'll be doing a 420a engine swap tomorrow anyway, so I'll be home all day with at least 3 dsm's to play with.

Greg

'19 Genesis G70 3.3t AWD
'88 Chrysler Conquest TSI

yeah the engine is mobile (it's n the back of my truck still), its not chris's, its my $132.50 special. i might have to take you up on the offer greg, but i'm not in a big hurry to rebuild it yet. i'll mess with more this weekend thanks for the suggestions.

The 2GNT is Gone... and the curse too!!