I have replaced these two three times,this time it pulled one of the bolts totaly out of the tranny. I am getting tired of replacing these and haveing them break all the damn time. I even welded reinforcment plates on the back one and guess what i replaced today.

do you have a solid front mm? i do and i already replaced my rear mm
and my sides are'nt in that good of shape either. possibly you should replace them all stock or solid. who knows?

96RS
------------
TRUST HEADER
TRUST EXHAUST
TEST PIPE 2.5"
AEM CAI
AFX 55mm TB
AFX UNDERDRIVE PULLEY
AFX SOLID FRONT M.M.
OPTIMA BATTERY
NOLOGY WIRES
TENZO FRONT T.BRACE BAR
EIBACH SPORTLINES
KYB AGX SHOCKS
KENWOOD 560 AMP
12" KICKER

mounts are all stock except the inserts.

and now no salvage yards will sell them?because they cut them anyone have some for sell the back.

I need to replace my rear one as well. It's got to be totally gone. It rattles the heck out of the car in 1st and 2nd .

ill have some filled and or solid mounts for sale in like a week or two thats front and back and both sides if your interested..

all the rubber will be removed and filled with majic substance that hardens like rock =P

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

stiffening them is going to cause them to break more.

you guys just need to go easier on your cars.. damn

j/k, i know the 420a motor mounts suck ass and break all the time.

if i put right foot down the least bit depending on the road kiss the mount good bye, then i get the good ole clutch drain.

I blew out my rear one as well.....I have the AFX solid front mount......our mounts do suck indeed! How much do they run anyway and from where?

I have inserts front and rear, no probles with any of them. Are you replacing the broken ones with junkyard motor mounts?



15.9 @ 86.7mph
97 Eclipse RS

Injen CAI, 55mm TB, P&P Intake, Crower Stage 2 Cams, Hooker Header, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC

my solid mounts will be 50$ for left and right 75$ for all 4 , thats if i get a core if not thre is a core charge,

u get them throught he website, no pics as of yet dougie2 will have the first set for his turbo rebuild with my manifold...

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

75 for all 4? i will take them let me know when they are ready, and do you take paypal? email me @ kyeclipseracer@yahoo.com

well i might not be able to wait and with my 15% off at dealer it will cost $58.12.

which mount is broken at the moment ?

i could also get u a set of prothane inserts if u wanted..

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

rear mount and how much on the inserts?