Woo Hoo, I just did the install on my S-AFC, no problems actually one of the most trouble free installs I've done in a while. A?/F Meter is also in.

All I need to do is find an 8x1.00 mm tap. I have 7x1.00 and 8x1.25 but no 8x1.00 then I canb insdtall the EGT and be set to go!

"Claim Victory in your heart, and the universe will follow."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads, S-AFC, A/F Meter

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, SS Clutch Line, Rear Motor Mount Ins., EGT

Waiting for from RRE: Front Lower Tie Bar

Waiting for: Intake Manifold being ported/polished

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Cool, when you start tuning it I'm curious to see what you lean it out to. I've got mine a -7% and it's still pretty rich at WOT.


-Avenger
99 Eclipse RS
AEM CAI w/ bypass valve, Tanabe Hyper Medallion cat-back exhaust, Unorthodox UDP, Magnecore 8.5mm Plug wires, 55mm bored TB, S-AFC, Eibach Sportline Springs, Ingalls Front and Rear Camber Kit, Enkie Shogun 17" wheels w/ 215/40/17 BFGoodRich Scorchers (yellow), Flashy A/F gauge

Sitting around: Intake manifold for porting

On the way: OBX Cam Gears, Digital A/F guage

-"Easy Mac"
05 Mazda RX-8 (RR8 #88)
99 Eclipse RS 398whp & 372lb-ft

Avenger, what O2 volts were you running at -7% ???

The last time I ran with it, I didn't have a chance to datalog my O2 volts, (and I STILL don't have an EGT gauge, yea I know I should get one, I don't need the lecture )

I was running -5 from 5K up to -6 at the very top (7K rpms) I THINK that was just about right, or maybe just a hair too rich, but I can't be sure (damn, need a laptop and datalogger too!)

Todd Scungio
98 RS
15.803 @ 86.48 MPH

"Tutto fa brodo."

Todd Scungio
98 RS
15.173 @ 90.70 MPH

And also a 2011 Ralliart

Remember Todd every car is a little different. Depending on what mods you have done too, the adjustments will differ.

"Claim Victory in your heart, and the universe will follow."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads, S-AFC, A/F Meter

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, SS Clutch Line, Rear Motor Mount Ins., EGT

Waiting for from RRE: Front Lower Tie Bar

Waiting for: Intake Manifold being ported/polished

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

I don't know the voltage but my flashy a/f gauge is 2 leds for the green end. (I'm waiting for the digital one as we speak). Don't worry ... I don't have an EGT either ... yeah I know ... I don't need the lecture either.


-Avenger
99 Eclipse RS
AEM CAI w/ bypass valve, Tanabe Hyper Medallion cat-back exhaust, Unorthodox UDP, Magnecore 8.5mm Plug wires, 55mm bored TB, S-AFC, Eibach Sportline Springs, Ingalls Front and Rear Camber Kit, Enkie Shogun 17" wheels w/ 215/40/17 BFGoodRich Scorchers (yellow), Flashy A/F gauge

Sitting around: Intake manifold for porting

On the way: OBX Cam Gears, Digital A/F guage

-"Easy Mac"
05 Mazda RX-8 (RR8 #88)
99 Eclipse RS 398whp & 372lb-ft

Damn, I can't believe I forgot my acknowledgement section.

Thanks to:
Dave (my friend who will never read this for his help on the install)
Wyatt (great write up, and very comforting having your write up match my Chiltons before I started cuttin things and splicing into wires)
John99RS (Again nice to have the O2 wire confirmation from yoru site match my manual)

Thanks to all who helped my with my new toy.

"Claim Victory in your heart, and the universe will follow."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads, S-AFC, A/F Meter

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, SS Clutch Line, Rear Motor Mount Ins., EGT

Waiting for from RRE: Front Lower Tie Bar

Waiting for: Intake Manifold being ported/polished

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

If you need an 8X1.00mm tap go to www.mcmaster.com they have everything you could ever need for them that where we get all the supplys for our machine shop here is a the part number you want 26015A175 and it about 7 bucks for it



Eric (Nkysmrf on AIM And Aol and my new name on AIM is Eclipse2GNT)
97 Eclipse GS

97 Eclipse GS

Thanks Eric, I'm going to try like Hom Depot and a couple hardware places but if they don'thave it, I'll orders from there. Thanks again!

"Claim Victory in your heart, and the universe will follow."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads, S-AFC, A/F Meter

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, SS Clutch Line, Rear Motor Mount Ins., EGT

Waiting for from RRE: Front Lower Tie Bar

Waiting for: Intake Manifold being ported/polished

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Hey Michael,

what type of egt gague did you but and from where and how much?


-Avenger
99 Eclipse RS
AEM CAI w/ bypass valve, Tanabe Hyper Medallion cat-back exhaust, Unorthodox UDP, Magnecore 8.5mm Plug wires, 55mm bored TB, S-AFC, Eibach Sportline Springs, Ingalls Front and Rear Camber Kit, Enkie Shogun 17" wheels w/ 215/40/17 BFGoodRich Scorchers (yellow), Flashy A/F gauge

Sitting around: Intake manifold for porting

On the way: OBX Cam Gears, Digital A/F guage

-"Easy Mac"
05 Mazda RX-8 (RR8 #88)
99 Eclipse RS 398whp & 372lb-ft

I bought an Autometer Sport Comp 2 1/16" gauge without probe for $100. Then a westach Type K probe for like $35, and a 6 foot extension wire for like $10.

"Claim Victory in your heart, and the universe will follow."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads, S-AFC, A/F Meter

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, SS Clutch Line, Rear Motor Mount Ins., EGT

Waiting for from RRE: Front Lower Tie Bar

Waiting for: Intake Manifold being ported/polished

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.