where can i buy all 4 motor mount inserts for my nt

I got my front and rear inserts from summitracing.com They are made by Energysuspension. I dont think they make the side mount inserts...I could be wrong though. Some people have used Windshield Urathane adheasive to fill the holes in the mounts, and when it dries, it hardens up pretty good. But anyway, the front and rears are the most imprortant anyway, since the motor and tranny are being torqued front to back, not side to side. The vibration from having all inserts in all mounts, may be a bit rough and unbearable, esp at idle.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

I think you can get them at Howell Automotive too. You might be better off buying stock ones though. The uretane one vibrate like crazy.

Built 420a
NER turbo kit T3/T04s ball bearing
AFX UDP
Crane 0014 cams

>I got my front and rear inserts from summitracing.com They
>are made by Energysuspension. I dont think they make the side
>mount inserts...I could be wrong though. Some people have used
>Windshield Urathane adheasive to fill the holes in the mounts,
>and when it dries, it hardens up pretty good. But anyway, the
>front and rears are the most imprortant anyway, since the
>motor and tranny are being torqued front to back, not side to
>side. The vibration from having all inserts in all mounts, may
>be a bit rough and unbearable, esp at idle.

so do you aprove of them? "you like?"

u can get the better prothane mounts at RRE,

im setting up a jig to make Solid Mounts or taking stock ones and filling them with magic substance to harden and create them as solid mounts,

if your interested, pm me they are about the same price for my mounts as the prothane ones...

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

Hey All show, I have some RRE motor mount inserts. PM if you need pics. I've never used them.