Well I was going to install my Jeep Throttle body today. The problem I'm having is that the write up says to use "M8x25 1.25 pitch Allen head bolts" I've been to C.A.P. Home Depot and AutoZone. No one has heard of them. Can anyone tell me what they used to connect the TB to the intake?


Thanks in advance.

hehe already IM you

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for

I got them at my local Sears Hardware store.


95 Eclipse RS : 5 speed
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

Ok I got it on, The only problem I'm having is, when I first start the car it idles around 1100. When I take it for a ride it takes a min for the idle to come back down when i hit the clutch in. Sometimes it doesn't come down even though the plate is closed and the pedel comes back, I have to tap the gas and then it comes back slowly...Anyone hoace any clues or ideas...

Try putting a little more slack in the throttle cable.


95 Eclipse RS : 5 speed
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

Tried that......The only thing I can think of is I didn't put silicone on the button pulg I used to block the hole on the intake....would that do it???