Man its cold here in toledo, but anyways as i was warming up my car. i noticed that there was a rattling noise coming from the right side of the engine, by the timing belt side, where my oil leak is. Ever since i got the HG replaced it has been making this noise. Is it because of the cold weather or is it that the mechanics didnt put the engime back together right.

It might be the clutch or throw-out bearing rattling. But thats on the driver side. I live in KS and when it gets below 30 it starts to rattle. I thore the trans. down and found nothing. I put a new clutch and throw-out bearing in and it still rattles. Hope this info helps.

2.0L bored .20
Wiseco pistons
Eagle rods
T3/T60-1 turbo
Jeep 60mm Mod.
underdrive pulley
780cc injectors
AEM FIC
21psi

It's possible that they didn't replace all of the rear timing belt cover bolts.



EDIT : Open the timing belt window at the top of the timing belt cover. Take a look at the timing belt. Are there wear marks on the outside of the belt? It would look like the outside half(the half thats closest to the motor) is rubbing on something. If you see these marks, there's a good chance that the rear timing belt cover wasn't installed properly.


ride__________95 Eclipse RS : 5 speed
power________Field SFC Hyper-R : Gude cams : Jeep TB : AFX UDP : ram air : test pipe : GST catback
suspention___Hurricane F/R lower strut ties : BOMZ F/R upper strut bars : ES inserts
sound________Kenwood KDC 5000 : Audiovox 8" sub toob : Xplod 222
shizzle_______AutoCommand remote start : dual air horns : Caspers o2 simulator(rear)
incomming___Bosal header(maybe), 14b turbosystem(eventually)
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

95 Eclipse RS : 5 speed
14.76 @ 94.72mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

Wait without that top timing belt cover your belt will get fuxed? I told mechanic to leave it off for bling factor but... if its gonna fuck me brand spankin' $80 gator grip up id wanna leave it on..

I know the risks of having it off because of little pebbles flying up, im not trippin about that... but just if the cover plays some part in keeping the belt aligned/in place ill put it on..

FS: 2.5" Test Pipe 25 shipped

well my car is an automatic so its not the clutch. but i'll look into the timing belt situation.

Does the sound go away after you've warmed up?

mine's doing the same thing. rattling sound while warming up. listen closely to the valve cover too. if it's coming from underneath the valve cover, it's your lifter/lashers. we talked about this in a previous thread but i can't seem to find it in the search. it has to do with our poor lifter/lasher design, oil and cold weather. the fix was to get the upgrade PT Cruiser lifters.

yea the noise does go away when the car warms up, but the thing is it didnt make this noise until after i got the head gasket fixed. Also i can hear it sometimes after i get do accelerating the gas. But then again it does it when the eengine is still alittle cold

i went and took it to the place that had fixed my head gasket, and they said that the rattling noise came from the adjustable cam gears i had installed. Supposedly, the cam gears have a nick in them and they are rubbing on the hg sealent and making it leak oil. They want to charge me another 800 dollars. or they said i could get an entire new head for 1500:o They also said the camshafts were poorly worn out too. I think theses people people are trying to get more money out of me. What do u guys think. If these things these people say are true. then im going to save my money and buy another car, but it will be turbo

Hey what shop is workin on your car? I grew up in Toledo. Maybe try and locate where exactly the noise is coming from. Your cams should not be worn out, and even if they were, they were not making any noise before the head gasket was done. Sounds to me like its somewhere in the timing belt path maybe, but could very well be in your valvetrain somewhere. Try and locate it if you can. I'd be wary of the shop that did your work.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Its called hastys. and its an bp gas station on dorr street. Yea thats the thing, before they fixed the car, my car was running like a champ. And now its still leaking oil and making noises by the timing belt. Im very pissed of. They told me stupid shit like. Ohh its just a neon engine and it a crappy engine. U should get a camero or a mustang. I just shook my head. I think there trying to get some more money out of me.