Anyone here running Blackdog or Ferrea oversized valves?

Built 420a
NER turbo kit T3/T04s ball bearing
AFX UDP
Crane 0014 cams

Call me bro!

Here is what I have have.
JE 8:8.1 with rings boared .20 over
Seinze custom rods (600+hp)
Knife edged and shaved crank
Clevite bearings
Shaved oil pump to bump up oil preasure
Stage 3 ported and pollished head
twin Accel coil packs
PT lashers
ov

i bleive dino is running them all the top drag racers hahn and phat ridz,

dino is running them i think, ferra is the only company i know of making valves for our cars, ive used their products for years in the v8 world top notch stuff and great in imports they have another new superior line they just unveiled

for 230$ through blackdog thats a hell of a deal...

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

where can you get these valves and what gains can be expected of them. sorry just never heard of anyone makeing valves for us

1997 Dodge Avenger I-4 5-Speed
DreamSpeed Cold Air Intake,AF/X Under Drive Pully, ES Motor Mount Inserts, MSD DIS2, MSD Coil Pack, MSD 8.5mm Wires,Aluminem Flywheel,Spec Stage1 Clutch,Crank Scraper, Quaife LSD,Airmass 4-1 Headers, Test Pipe, Bosal Catback,B&M Short SHifter(50%),Symbroski Shifter Kit, Grounding Kit, Solid Front Motor Mount

i got ferera's too. 1mm oversized. Call ARD for pricing on them. The phone number 713-984-9140.

-"Easy Mac"
05 Mazda RX-8 (RR8 #88)
99 Eclipse RS 398whp & 372lb-ft

ferras got the only ones to my knowledge, gains wont be too high unless your boosting and with a good port and polish job u could see another 10-15hp depending ons etup, for just the oversized valves,

black dog has the full set for 2304 i havent seen anyone beat it ard wasn't even close last i check but that was a while ago

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

Did you say 2304 as in $2,304 dollars. dam thats alot for 16Valves

1997 Dodge Avenger I-4 5-Speed
DreamSpeed Cold Air Intake,AF/X Under Drive Pully, ES Motor Mount Inserts, MSD DIS2, MSD Coil Pack, MSD 8.5mm Wires,Aluminem Flywheel,Spec Stage1 Clutch,Crank Scraper, Quaife LSD,Airmass 4-1 Headers, Test Pipe, Bosal Catback,B&M Short SHifter(50%),Symbroski Shifter Kit, Grounding Kit, Solid Front Motor Mount

Blackdog has them for $230!

Built 420a
NER turbo kit T3/T04s ball bearing
AFX UDP
Crane 0014 cams

Whats black dogs website or number. Is that the number that the other member listed above.

1997 Dodge Avenger I-4 5-Speed
DreamSpeed Cold Air Intake,AF/X Under Drive Pully, ES Motor Mount Inserts, MSD DIS2, MSD Coil Pack, MSD 8.5mm Wires,Aluminem Flywheel,Spec Stage1 Clutch,Crank Scraper, Quaife LSD,Airmass 4-1 Headers, Test Pipe, Bosal Catback,B&M Short SHifter(50%),Symbroski Shifter Kit, Grounding Kit, Solid Front Motor Mount

http://www.blackdogmotorsports.com

Greg Williamson
1999 Eclipse GS "Sport" (Sold)
Star Stage III
12.817 @ 109.36