first off i did search. i searched for 60mm and only 5 topics came up and none of them really answered my question. What company makes the 60mm throttle body for our cars. you know the nice ionized ones. could you give me a site please. and if i where to get this. i would have to port and polish my intake mainifolds and the gaskets right. to match the new trottle body. thanks for anyhelp anyone can give me. Thnaks everyone

1997 Dodge Avenger I-4 5-Speed
DreamSpeed Cold Air Intake,AF/X Under Drive Pully, ES Motor Mount Inserts, MSD DIS2, MSD Coil Pack, MSD 8.5mm Wires,Aluminem Flywheel,Spec Stage1 Clutch,Crank Scraper, Quaife LSD,Airmass 4-1 Headers, Test Pipe, Bosal Catback,B&M Short SHifter(50%),Symbroski Shifter Kit, Grounding Kit, Solid Front Motor Mount

check the general, sales and wanted, and announcement forums. There are alot of posts on people selling and with that, alot of questions and answers.

Most of the people you can buy from will have a gasket for you, etc. The manifold will have to be ported to match the 60mm or it won't be utilizing it's full potential.

16.1 @ 87.11
http://www.virtuallyinfamous.com

ARD 57mm tb and p&p manifold, Neuspeed STB, Pro-kits, Illuminas, Injen CAI with K&N, 2.5" pacesetter catback,
AF/X UDP, Rear STB, Powerslot rotors, RRE SS Brakelines.

search for jeep instead i bet you'll come up with a lot more.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

Try this link
http://www.neonspeedlab.com/tbstatus.htm

peace
WIKKI


THAT is not f**king THAT!
THIS is f**king THIS!

hey i went to their website and just wanted to know the 60mm throttle body for the neon does that fit our 420A's. or the one he makes for our engines is different

1997 Dodge Avenger I-4 5-Speed
DreamSpeed Cold Air Intake,AF/X Under Drive Pully, ES Motor Mount Inserts, MSD DIS2, MSD Coil Pack, MSD 8.5mm Wires,Aluminem Flywheel,Spec Stage1 Clutch,Crank Scraper, Quaife LSD,Airmass 4-1 Headers, Test Pipe, Bosal Catback,B&M Short SHifter(50%),Symbroski Shifter Kit, Grounding Kit, Solid Front Motor Mount

I paid for my 60mm tb from NSL 2 months ago, and guess what, I haven't recieved a damn thing. So unless your rich and just want to give away 207 dollars, otherwise I wouldn't give a damn dime to NSL.

you either make one reading Jims review or buy one from 1TuffRS, either way the gains are there and its a great mod.