Does anyone know how to test the MAP sensor?

venomtalon@aol.com

Performance Mods: Custom CAI, Jeep 60mm TB, Ported Intake Manifold with Jeep TB match, 5 angle valve job, Head milled .020, Regrind Cams, PT Lifters and Rockers, AEM Cam Gears, OBX Wires, NGK Plugs, AFX UDP, OBX Header, OBX

As far as I know, there's not really a test listed in the Chiltons manual or the FSM. There is a good description of the MAP sensor in the FSM, that will clue you in on how to test it. It gets 5v from the ECU. The ECU reads the voltage before starting the engine, and then adjusts shit depending on what it is while the engine is running.




ride__________95 Eclipse RS : 5 speed
power________Field SFC Hyper-R : Gude cams : Jeep TB : AFX UDP : ram air : test pipe : GST catback
suspention___Hurricane F/R lower strut ties : BOMZ F/R upper strut bars : ES inserts
sound________Kenwood KDC 5000 : Audiovox 8" sub toob - no sub amp(damnit!)
shizzle_______AutoCommand remote start : dual air horns : Caspers o2 simulator(rear)
incomming___Bosal header
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html

95 Eclipse RS : 5 speed
14.76 @ 94.72mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html