I was at school and i went out to my car to see my exhaust hanging on the ground and foot marks scratched up and down my back bumper. Some dick head kicked my muffler and pipes till they broke all the hangers, bent the pipes, and broke the rubber grommet. What should i do because now when i drive it flutters and has substantially less power. What i should do is get even, but i don't know who it is. What exhaust replacement would be affordable and less prone to getting broken? i'm looking at pacesetter right now just because it's cheap, any other suggestions under 300$?

Nos Fogger Kit,AemCAI, TopFuel UDP, pacesetter cat-back, ARD bored 57mm t.b., P&P intake mani, Ractive front/rear strut bars,rear tie bar,eibach sportlines,tokico blues, morosso wires, ngkIX plugs, konig subzeros,proj. heads,gunmetal tails, rev.indiglow gauges,reverse light mod

Under $300, GS-T catback, 5-zigen axel back or any other name brand axel back, or obx cat back.

Ryan

Is it stock exhaust? If you need the hangers, let me know think I still have some of mine at my parents' house in OP. I also have some pipe and a welder. So if you want to pay me, I'll fix it. If you want something decent, then just mail order a muffler or get a GS-T rear section. Either way you will see the same gains (minimal). E-mail me and I'll see if I can help you out.

Shit is all apart. Typical...

There is no exhaust that is 'less prone' to breaking...if someone goes at any muffler with a flurry of kicks they will be able to break something...

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

First.. Find out who it is, Next round up all the 2gnters you can and F*ck him up...
No one will ever do it again
(sorry to hear about that, must be a lot of jealous people)


Nick
97RS
Custom IHI Stage2
Obx exhaust, Limo Tint,
Custom interior, Upper Strut Bar, Kenwood/pioneer stereo.

Nick
97RS

Well I would definitly find out who did it and then send them to the hospital. :o

Then fix the exhaust.

MODS:

HRC 16g turbo kit, Spearco custom FMIC, Custom IC piping, VT rebuilt engine: Custom 8.8:1 compression CP pistons, Eagle connecting rods, Melling oil pump, Clevite bearings, 370cc injectors, Vortech S-FMU, Apexi N-1 catback exhaust, AFX UDP, Autometer boost gauge, fuel pressure gauge, EGT gauge, Corbin's digital A/F gauge, Tokico Blue shocks, Tein springs (1.5" drop), 18" Konig Verdicts rims, VIS stock-style Carbon fiber hood

i found out who did it and confronted him yesterday in school and beat the shit out of him and sent him to the office crying. Then i went to his house last night and pulled his oil drain plug and dumped draino in his gas tank so he gets the picture not to screw with my pride and joy (my eclipse)

Nos Fogger Kit,AemCAI, TopFuel UDP, pacesetter cat-back, ARD bored 57mm t.b., P&P intake mani, Ractive front/rear strut bars,rear tie bar,eibach sportlines,tokico blues, morosso wires, ngkIX plugs, konig subzeros,proj. heads,gunmetal tails, rev.indiglow gauges,reverse light mod

I must say, you really got him back if in fact you did all that. I would look out for him to come back at you with a blown engine attitude. I know if I just lost an engien I would be in a fury....Probrably kill you....Anyways good luck man


Ronnie
97 Gs<~~~~~150 across the top.....

If you really did that, look forward to a trip to court. Bet it was fun though!

Luke

1998 Mustang GT 5-speed
2002 Lone Star Shelby Cobra Replica

whipe prints off car
find allaby (sp?)

then tell this story "I beat the shit outta him for tearing my car up, no need to retaliate on his car after I did so to HIM"


then quote tupac

"I aint a killer but dont push me, revenge is like the sweetest joy next to gettin pussy"

turbo8u: "jiggle jiggle then vroom vroom pshhhh"
-Mike Pruett
2gnt member# 976
MOPAR Stage 2
SRTForums.com member #37 (Yeah, I signed up when it first came out, and ended up getting one, cool huh?)
"The object of war is not to die for your country but to make the other bastard die for his."
- General George Patton (1885-1945)

>i found out who did it and confronted him yesterday in
>school and beat the shit out of him and sent him to the
>office crying. Then i went to his house last night and
>pulled his oil drain plug and dumped draino in his gas tank
>so he gets the picture not to screw with my pride and joy
>(my eclipse)

what kind of car did he have and did you find out why he even screwed up your car?

That kids car seized on his way to school and had to ride the bus i feel better but my exhaust is still hurting. If i drive it rattles and buzzes etc. I'll probably buy a pacesetter cat back system for christmas, Does anyone have anything good to say about pacesetter?

Nos Fogger Kit,AemCAI, TopFuel UDP, pacesetter cat-back, ARD bored 57mm t.b., P&P intake mani, Ractive front/rear strut bars,rear tie bar,eibach sportlines,tokico blues, morosso wires, ngkIX plugs, konig subzeros,proj. heads,gunmetal tails, rev.indiglow gauges,reverse light mod

>That kids car seized on his way to school and had to ride
>the bus i feel better but my exhaust is still hurting.
>If i drive it rattles and buzzes etc. I'll probably buy a
>pacesetter cat back system for christmas, Does anyone have
>anything good to say about pacesetter?

no. dont buy it.you get what you pay for. people will try to say.. you can weld on a new muffler... why not just get what you want and not buy crap in the first place. just my oppinion.


dont fuck with peoples cars. if everyone just left ppls shit alone itd be all good, someone fucks my car up screw their car... im gona get even, but nothing outragious.. lets face it.. your ass will end up in jail anymore

Travis
************
Blue 93 Talon AWD
Best Time 11.9 w/ 104 octane
-Objects in mirror are getting thier asses kicked-

Well, right now is one of those think for the future times. If you plan turbo real soon, then save and get 3" cat-back. If you plan N/A with just bolt-ons, just go and get a muffler with a 2.5" in and have it welded on. I would recommend Hayame(sp) and you can get it local at Tokyo Image, but it will be a little high. Got one on my dad's 1.8t jetta and it sounds nice. I'll weld it on if I got time and you got some moutain dew.

Shit is all apart. Typical...

the kid drove some 80's ragedy ass station wagon cuz he totalled his first car dui. I felt it was deserved to do what i did i don't like people to fuck with my shit cuz they're jelous. I put all my money that i earn myself into my car, no one elses so when it gets screwed up i get mad. Anyways, Pacesetter is crap eh? Would i notice any h.p. gain comapred to stock if i got the pacesetter and a high flow cat?

Nos Fogger Kit,AemCAI, TopFuel UDP, pacesetter cat-back, ARD bored 57mm t.b., P&P intake mani, Ractive front/rear strut bars,rear tie bar,eibach sportlines,tokico blues, morosso wires, ngkIX plugs, konig subzeros,proj. heads,gunmetal tails, rev.indiglow gauges,reverse light mod

>Pacesetter is crap eh?
most definetly

Would i notice any h.p.
>gain comapred to stock if i got the pacesetter and a high
>flow cat?
id rather shove a potato in my exhaust.. lol jk.. itd be there a little but its no tuned for your car like one from greddy or apexi etc... you get what you pay for... or rather.. you pay for what they put in it.
id get a test pipe

Travis
************
Blue 93 Talon AWD
Best Time 11.9 w/ 104 octane
-Objects in mirror are getting thier asses kicked-

not to be an ass. but I think you^^ are full of it.
Yes pacesetter is a cheap exhaust, but for the money you will not find a better alternative for a 2.5" mandrel bent exhaust that will be more than adequate for 300hp. If you don't like the cheesy exhaust tip then just get a different one. I think you should do a bit more research before you go an tell someone to spend twice as much just for a brand name product that has no obvious advantange over this product.

Late

-97 GS (First project, 299 whp)(sold)
- 97 RS 2.6 last numbers: 306hp, 352tq @16psi (Dead, parted out)
- 99 GS OZ, Hahn Kit, 56k miles (Sold)
--------
- 00 Nissan Maxima GLE (Daily Driver)
- 02 Audi A4 1.8T Quattro

>not to be an ass. but I think you^^ are full of it.
>Yes pacesetter is a cheap exhaust, but for the money you
>will not find a better alternative for a 2.5" mandrel bent
>exhaust that will be more than adequate for 300hp. If you
>don't like the cheesy exhaust tip then just get a different
>one. I think you should do a bit more research before you go
>an tell someone to spend twice as much just for a brand name
>product that has no obvious advantange over this product.
>
>Late

I agree with Whodatt. Research before speaking n00b.

Edit: Oh and...

Brynden