Today after work I got out of my car and noticed a good size puddle of oil on my driveway , I open the hood and a load of smoke flys out so I took it to my friends shop, we left the engine running and saw smoke just pouring out of the valve cover, I just put new vavle seals, plugs and plug wires on sat. and oil is still leaking out from the valve cover. Also I have a water leak and my anti-freeze is leaking. What do I need to do? My Turbo kit should be coming in around Dec 5th or 10th I need to get this problem fixed before I put the kit on. Please help .



99 GS OZ EDITION
MODS- Apexi N1 Catback
Progress Sport Springs
Audio- JVC CD/TAPE/MP3 Player
Pioneer XM Radio
2 Alpine type R 12s
MTX-775 Watt Amp

Future Mods-
Hahns Stage 2 Turbo Kit
17in Rims
JSP Carbon Fiber Blade or Arospeed Carbon Fiber ST wing
Carbon Fiber Vented Hood
Sparco Racing Seats
AEM Big Brake Kit
Final Drive Mod
Tansco Shift Kit
Bottom End Kit
More to come......

99 GS OZ EDITION
MODS-
Hahns Stage 2 Turbo Kit
Apexi N1 Catback
Testpipe
Progress Sport Springs
Audio- Sony LCD entertainment stereo
Pioneer XM Radio
2 Alpine type R 12s
MTX-775 Watt Amp

Future Mods-
17in Rims
JSP Carbon Fiber Blade or Arospeed Carbo

obviously if you just changed the valve cover gasket/spark o-rings, and its leaking from that place, THEN you didn't do it right.

look in obvious spots for coolant leak, hoses, pump, blah blah blah. it should be obvious, if not, then go get it pressure tested.

You probably didn't torque it all down evenly in the steps described in the overhaul guide. Valve covers are very picky, mine leaks like a sumbitch in 2 and 3, but i have a few messed up threads...

Get a torque wrench and that manual, you have to tighten them down in order, in three steps...that is-
torque each to so-and-so, then torque to so-and-so, then so-and-so.



Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

Jon

1997 Eclipse RS | 2001 Lexus IS300
12.671 @ 111.660 1.586 60' 5/28/04

www.haiokuracing.com

Also make sure you use the silicone stuff at the crease points. I changed my valve cover gasket about a month ago (first time ever on any car) and followed the VFAQ to a T. I ran my finger around the edge of my valve cover yesterday and I had zero leaks, checked plug wells and the threads on my plugs and found zero oil there as well.

AEM CAI, AFX Underdrive Pulley, Greddy Header, Tsudo N1 2.5 stainless catback, Homemade groundwire kit
17" Fondmetal 6500, Tokico Illuminas, Eibach Pro Kit Springs, Front Upper Strut Bar, Baer Track System, Drum to Disc, RMDSM Anti-sway bars front and rear.