What is the reading on your TPS when you are at WOT? I know its not supposed to be reading 100%, but im only getting like 87% at best. Is that ok? Let me know. TIA
amiller99rs: seriously, chicks suck sometimes amiller99rs: like if a girl walked by and said "Hey, nice cock" and just kept going you'd smile all day about that
#37020, "RE: Those with an S-AFC...." In response to Reply # 0
why shouldn't it be 100%? i had my safc set up a little different since i had corbins safc boost fooler so i can't help you out.
i just know that my friends safc reads 100% when he floors it, thats why i asked
http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions 95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD 93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD 2006 Scion tC
#37021, "RE: Those with an S-AFC...." In response to Reply # 1
Turn your key to the ON position, but do NOT start the car. This will give power to everything electrical in your car. Then hold the gas pedal to the floor and watch the AFC. The TPS reading will slowly rise to 100%. This is sort of calibrating the AFC.
You are not your job. You're not how much money you have in the bank. You're not the car you drive. You're not the contents of your wallet. You're not your fu**ing post count.
#37022, "RE: Those with an S-AFC...." In response to Reply # 2
I will go try that as soon as i get my car back... as for why i thought that it shouldnt read 100%, I swear that I read that somewhere. Maybe not...
amiller99rs: seriously, chicks suck sometimes amiller99rs: like if a girl walked by and said "Hey, nice cock" and just kept going you'd smile all day about that
#37023, "RE: Those with an S-AFC...." In response to Reply # 3
YOu need to do the calibration like he said, as far as why its not 100% now is that our TPS is at WOT at like 3.8-4.5 volts dc while most the other cars they made the Safc for are higher than that
#37024, "RE: Those with an S-AFC...." In response to Reply # 4
i don't have the s-afc but most cars like hondas and most other cars read 5.0 volts and above, i bought and older zex kit for my 95 and i can't use it like it was meant to be used because i don't reach 5.0 volts at WOT. I had to use a thottle activated switch instead of the built in Zex kit signal activated switch so my point is that the s-afc could not possibly read 100% unless it learned that our cars are like 4.7 max at WOT
#37026, "RE: Those with an S-AFC...." In response to Reply # 6
Mine normally reads about 95% at WOT, sometimes 100% though.
Jason '11 Ford Mustang GT/CS '11 Ford Mustang V6 6-Speed (SOLD) '04 Nissan 350z Touring (SOLD) '95 Turbo Eclipse GS (SOLD and will be missed) '90 Talon TSi AWD (SOLD)
Search
Printer-friendly copy
3 Users in Chat
